|Max. height of the winding in streych the film||2 m|
|Max. speed of rotation of the platform||12 rotations/min.|
|Max. load weight for the winding in stretch||1800 kg|
|Max. size pallets||1200 mm x 1000 mm x 2000 mm|
|Conveyor speed||12 m/min. (standard)|
|Conveyor type||The roller conveyer with the chain drive|
|Distance between conveyor rollers||76 mm (diameter) / 108 mm from the center|
|Air consumption||6 kg/cm?|
|Electric characteristics||100 V, 110 V, 220 V, 230 V, 240 V 50/60 Hz, 1 phase|
|Power consumption||1,2 kW|
|Platform engine||0,75 kW, 220 V, EXPERT, 3 phases|
|Carriage engine||0,37 kW, 220 V, EXPERT, 3 phases|
|Engine of preliminary stretching of the film||0,37 kW, 220 V, EXPERT, 3 phases|
Palletoupakovshchik automatic stationary EXP-501A of production Extend Great International Corp. (Taiwan) represents the automatic car for packaging the pallet in streych (stretch) - the film equipped with the roller conveyer.
Extend EHR-501A is the innovation palletoobmotchik which allows to create full-fledged system of the winding of wholesale loads with use of the traditional palletoupakovshchik who is built in the automatic konveerny transfer line. The EHR-501a differs from EHR-501 in availability of the powerful conveyor of 500 mm which is installed on the rotary platform. The provided palletoobmotchik has the inexpensive price that allows to consider it as the budget decision for automation of process of the winding the pallet (pallets) in streych (stretch) the film. Thus, to dare to purchase the palletoupakovshchik of Extend EXP-501A, even small production campaign can
For this palletoupakovshchik the special option - the control panel is provided, thus, if pallet it is established on the rotary platform by means of the fork lift truck, his driver does not even need to get up from the place.
- Rotary platform with the power roller conveyer.
- Stretching streych films to 300% (1 m of the film stretches about 4 m that allows to reduce considerably the expense) by means of the motorized carriage.
- Return of the rotary platform to the initial position (positioning) upon termination of the work cycle.
- 3 programs of the winding of the pallet (pallet).
- Smooth start and stop of the rotary platform.
- Possibility of work in automatic or manual control mode.
- Regulated quantity of windings in the upper and lower part pallets.
- The opportunity to regulate the film tension, speed of rotation of the rotary platform and speed of the course of the carriage.
- Turn of the control panel on 180 °.
- Cutting of the film by means of the thermostring.
- Conclusion of messages on malfunctions to the control panel screen.
- Possibility of installation of additional windings for strengthening of this or that part pallets during the work in the manual mode.
- The safety switch for protection of the operator against injuries.
- Determination of height pallets by means of the sensor photo.
- The directing roller. Allows the end of the film to remain outside of the carriage in case of the gap.
- Touch screen, PLK.
- Diameter of the rotary platform is 2,5 m, 3 m.
- Stages for 1,8 m.
- Control panel.
The provided palletoobmotchik of EXP-501A is available in the warehouse in Moscow. Available also wide range of spare parts to palletoobmotchik. We make guarantee and post-guarantee maintenance (repair) of the packaging equipment. For carrying out diagnostics of the packaging equipment the service engineer leaves (across Moscow, as a rule within 1-3 days). By results of diagnostics of the packaging equipment, the decision on volume and terms of repair is made.