Bridge crane g / p 16t
- Customer pickup,
- In detail
- BrandКРАНОВЫЕ СИСТЕМЫ
- Country of manufactureRussia
- Load-lift capacity16 Ton
The process of movement runways (Beams) mounted to the inside of the building overlap. Outside the path of the beam suspended on a street overpass.
The difference overhead cranes from the support is the availability of consoles beyond the runway and flight nebolshayastoimost production of crane tracks.
|Capacity, m.||to 16|
|lifting height, m||up to 50|
speed m / min.
In those industries, which involved lifting equipment most commonly used mode radio valve, since its use provides a number of very tangible benefits.
If the production is operated by crane on the radio, it is possible to solve the following number of serious technological problems relating to the increase of the degree of efficiency and performance:
- There is no need to reduce the speed of the moving mechanisms, this creates the necessary conditions for free movement of the crane, especially on the ground, cluttered or equipment saturated building facilities or inventory from the warehouse;
- Operator manages to quickly perform finishing operations, while the load is raised or lowered more accurately than in the management of the cab;
- Increased safety, improved working conditions;
- There is a possibility of synchronous operation of two cranes. Thanks to one control panel is provided by the simultaneous operation of a moving mechanism, and lifting mechanisms;
- As a result of reducing the number of "empty" runs the crane increases efficiency;
- Reduces labor costs because they do not need to pay for training and job-professional crane operator;
- Simplicity and ergonomics.
Power hoist flat cable to the "C" profile
Power supply system consists of cables suspended from the cable cars, and designed for different operating conditions, such as:
- on open air,
- in an aggressive environment,
- with the presence of radiation;
- in conditions of high humidity,
- in dusty environments,
- in an explosive or flammable environment.
The control panel on a separate bus systems with flat cable to the "C" profile
This system allows you to move the control panel on the C-bus along the crane bridge at random regardless of where the position of lifting devices.
The end electric switch on the crane movement
It allows you to restrict the movement of the electromechanical way tap without touching the buffer stops.
Protection against collision with a neighboring crane
It allows electromechanically (limit switch) or optical (from the impact sensor) to limit the movement of the crane in relation to another crane located on the same crane ways.
Registrar crane operating parameters
In accordance with GOST 32575.5-2013 bridge type cranes with carrying capacity exceeding 10 tonnes, and the classification group (mode) is not less than the A6 should be equipped with registrars parameters of their work.
Recorder allows you to record the parameters of violations, including cases of abuse of duty cranes and unauthorized shutdown safety device and allows you to receive objective information about the operating time and mode of operation of the crane, with subsequent analysis of the information and the implementation of appropriate preventive measures actually reduce accidents cranes.
Basic requirements for registrars parameters set forth in RD 10-399-01.
Logger parameters in addition to registering performs preprocessing functions, accumulation and storage operations (renewable) and long term (long term storage) of information on the parameters of the crane within the prescribed period.
Load capacity and drive mechanisms of the German, Bulgarian, Italian or Russian production
The advantage of imported parts in quite a long time maintenance-free operation, while the domestic components require more careful monitoring, but correct operation is not inferior to imported lifetime. At the same time, the supply of spare parts for Russian-made mechanisms takes much less time consuming and expensive than imported ones.
Execution of a flying beam of sheet metal (box)
Box construction bridge crane has a high fatigue strength, lower overall height of the bridge and the possibility of application to the end beams withdrawable wheels. The main box beams made of four (sometimes three) closed space sheet planes. Provide spatial rigidity of the diaphragm, mounted within the beam along the length of the span and the stiffener.