- Country of manufactureChina
The camp is used for correction
deformations of shelves of a dvutavrovy beam,
arising in a consequence of heating when welding
Editing is carried out by rolling.
At the request of the customer, this equipment
it can be equipped mechanical or
hydraulic drive of correct
Camps are most widespread with
mechanical drive. They are distinguished by low
cost, in comparison with hydraulic
drive, and maximum reliability.
However the similar equipment cannot
to make editing of shelves of large - size beams with thickness of the shelf of 60 - 80 mm.
The hydraulic drive allows to create bigger effort of editing that gives the chance
changes of shelves of large - size beams, however the cost of this equipment it is noticeable
above mechanical analogs.
All delivered camps cope with the help of the portable control panel. In a set
deliveries in coordination can be also also included entrance and output live rolls
the required length.
The camp for editing of shelves of a dvutavrovy beam can be a part of a complex for production
beams or to be part of the automated line for production of a welded beam (p. 5).
The equipment is distinguished by simplicity of operation and high reliability. Similar camps
are widely applied in metallurgy, production of steel structures, industrial
installation and other branches.
Main technical characteristics
Thickness of the shelf, mm from 6 to 80
Width of the shelf, mm from 200 to 800
Height of a wall, mm from 160
Speed of editing, m/min. 17
Total length, mm to 15000
Power consumption, kW ~ 24
Additional equipment Entrance and output live rolls, additional
replaceable correct rolls