- Country of manufactureChina
- Power consumption106 kW
- Profile960х480х940 mm
The console unit is designed for submerged arc welding of T and I - beams. Installation allows welding tee, I - beams, as well as the variable section beams. During the welding beam is located on the stocks or tilting device, an angle of 45 degrees. Installation moves on rails along the beam, console, which is fixed on the welding head can move in both horizontal and vertical direction. Welding is carried out under a layer of flux at the position in the "boat", which allows to obtain a good penetration and weld leg.
Line, you can create four cantilever welding machines. On each of the units is welded one of the four welds beams. Positioning beam during welding and beam transfer from one plant to another are performed via roller conveyors systems, tilters and transfer carts.
However, it may be used as a separate, independent unit in production. Installation is moving along the track with a cantilever structure disposed thereon working equipment. In the equipment applied drive frequency converter controlled, allowing high precision to set the working speed. The portal is set welding head, which has three degrees of freedom of movement. flux recirculation system allows to accumulate 50kg flux and effectively perform its function even if it enters the large particles of waste slag. Mechanical system for tracking the position of the welding wire is simple and convenient to operate. Cassette for winding wire capacity of up to 70kg wire. All control the welding process is carried out with a single remote.