Currency RUB
Carving withdrawal of Mechanical-T Victaulic (Viktaulik, Viktolik) Mechanical Tee Threaded Outlet Couplings buy in St petersburg
ALL.BIZ Russia Russia products Water-, Gas-, Heating supplies Pipe fittings Offsets and adapting pipes Taps Carving withdrawal of Mechanical-T Victaulic (Viktaulik, Viktolik) Mechanical Tee Threaded Outlet Couplings
Buy Carving withdrawal of Mechanical-T Victaulic (Viktaulik, Viktolik) Mechanical Tee Threaded Outlet Couplings
Carving withdrawal of Mechanical-T Victaulic (Viktaulik, Viktolik) Mechanical Tee Threaded Outlet Couplings

Carving withdrawal of Mechanical-T Victaulic (Viktaulik, Viktolik) Mechanical Tee Threaded Outlet Couplings

Products from producer
In stock
Price:
260 RUB
Wholesale:
  • 200 RUB/pcs  - from 2 pcs
Shipping:
Russia, St petersburg
(View map)
Technical characteristics
  • Country of manufactureUnited States
  • Bend angle90 °
Description

Carving withdrawal of Mechanical-T Withdrawal of Victaulic Mechanical-T gives an opportunity to create direct branch by a branch pipe in any place of a pipe where it is possible to cut out an opening. This opening is cut out with a big size where the cuff which is rigidly fixing the provision of branch can be located. The laying sensitive to pressure condenses a pipe on outer diameter. Krestovy connections can be created, using two top cases of identical type and the size, by means of branch pipes of the identical or different size. NOTE: Cases of 920 type and type 920N cannot connect with each other for creation of krestovy connection. Withdrawal of Mechanical-T of type 920 and 920N is offered with flutes or a female thread. Make a choice for the order. Knots are delivered painted, with nuts with a covering. Galvanized cases are delivered with nuts with a covering. All sizes of types 920 and 920N are calculated on working by pressure of 500 pounds/quarter. inch / 3450 kPa for pipes from carbonaceous steel of category 10 and 40. They can also be used for pipes from polyethylene or polybutylene of a high pressure (PEVD). Nominal pressure for PEVD depend on characteristics of pipes. Apply for information on characteristics of other pipes to Victaulic. Types 920 and 920N are not recommended for use with plastic pipes from PVC. In practice withdrawal of Mechanical-T of type 920 and 920N has to be established so that the main connection and a branch pipe were strictly at an angle 90 ° if they constantly join a pipe surface. Case/covering: Malleable cast iron according to ASTM A-536, a class 65-45-12, with an orange enamel covering. Malleable cast iron according to ASTM A-395, a class 65-45-15 is available by special inquiry. • By request: With hot galvanization Laying: (to choose *) • The class "E" EPDM EPDM (a green code). Temperature range from - 30 °F to +230 °F / from -34 °C to +110 °C. It is recommended for cold and hot pipeline water in the specified temperature range, various diluted acids, air without impurity of oil and other chemical compounds. UL according to ANSI/NSF 61 of low +86 °F/+30 °C and high temperatures of +180 °F/+82 °C is certified. It is not RECOMMENDED FOR USE IN OIL-CONTAINING ENVIRONMENTS. • Class "T" nitrile Nitrile (orange code). Temperature range is from -20 °F to +180 °F/-29 of °C to +82 °C. It is recommended for oil products, air with the content of vapors of oil, vegetable and mineral oils in the specified temperature range. Higher than +150 °F/+66 °C or for hot dry air above F/+140 °F/+60 °C are not recommended for hot water. * The listed applications are only the general recommendations about application. There are scopes for which use of this laying are not recommended. Address the latest index of laying of Victaulic where rekomenovanny and unrecommended cases of their use are specified. Screws/nut: The tempered galvanized carbonaceous steel conforming to physical and chemical requirements of ASTM A-449 and physical requirements of ASTM A-183. IMPORTANT NOTES: Cases of 920 type and type 920N not mogutsoyedinyatsya with each other for creation of krestovy connection. • give an opportunity to make branch in any place of a pipe where it is possible to cut out an opening. • The laying sensitive to pressure creates consolidation • Apply for information on the krestovy Mechanical-T connections to the publication 11.03 • Admissible pressure on a steel pipe to 500 pounds/quarter inch / 3450 kPa; there are also for use with pipe PEVD • Sizes from 2 × 1/2"/50 × 15 mmdo 8 × 4"/200 × 100 mm IMPORTANT NOTES: Cases of 920 type and type 920N cannot connect with each other for creation of krestovy connection. • give an opportunity to make branch in any place of a pipe where it is possible to cut out an opening. • The laying sensitive to pressure creates consolidation • Apply for information on the krestovy Mechanical-T connections to the publication 11.03 • Admissible pressure on a steel pipe to 500 pounds/quarter inch / 3450 kPa; there are also for use with pipe PEVD • Sizes from 2 × 1/2"/50 × 15 mmdo 8 × 4" / 200 × 100 mm IMPORTANT NOTES: Cases of 920 type and type 920N cannot connect with each other for creation of krestovy connection. • give an opportunity to make branch in any place of a pipe where it is possible to cut out an opening. • The laying sensitive to pressure creates consolidation • Apply for information on the krestovy Mechanical-T connections to the publication 11.03 • Admissible pressure on a steel pipe to 500 pounds/quarter inch / 3450 kPa; there are also for use with pipe PEVD • Sizes from 2 × 1/2"/50 × 15 mm to 8 × 4"/200 × 100 mm

Withdrawal of VICTAULIC Russia Mechanical-T types 920 and 920N Victaulic Russia (Viktolik, Viktaulik) is analog:
VIKING (VIKING, Vikingrus) T-connection with a gruvlochny exit Model 7722
VIKING (VIKING, Vikingrus) T-connection with a carving exit Model 7721
DINANSI (Dingangxi, Fireman) Branch carving / Threaded Mechanical Tee
DINANSI (Dingangxi, Fireman) Branch carving small / Small Threaded Mechanical Tee
DINANSI (Dingangxi, the Fireman) Branch under coupling / Grooved Mechanical Tee
ADL (ADL) 3G the Tee mechanical with grooves (Mechanical Tee)
ADL (ADL) 3J the Tee mechanical with a female thread (Mechanical Tee)
Anvil GRUVLOK (Anvil Gruvlok) Tee mechanical (Mechanical Tee)
Fig.7042, Fig.7044, Fig.7045, Fig.7046, Fig.7047, Fig.7048, Fig.7049
Rapidrop (Rapidrop) Mechanical Tee Grooved Outlet (3G), Mechanical Tee Threaded Outlet (3J)
Tyco Grinnell (Tayko Grinnell) Figure 702 Mechanical Outlet Couplings

Shipping method
Contact the seller
Carving withdrawal of Mechanical-T Victaulic (Viktaulik, Viktolik) Mechanical Tee Threaded Outlet Couplings
Carving withdrawal of Mechanical-T Victaulic (Viktaulik, Viktolik) Mechanical Tee Threaded Outlet Couplings
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Compare0
ClearSelected items: 0