Purpose of ZR-150A-260V
The device is intended for a charge (category) of acid and alkaline rechargeable batteries of all types operated on a car - motor-transport, special transport, communication, aircraft, electrotransport, railway and so forth.
The enclosed space with the ambient temperature from +1 to +35 °C, not vzryvo-and not fire-dangerous, not containing aggressive vapors and gases, atmospheric pressure - 630 … 800 mm Hg, relative humidity of air (at 25 °C) - 80%.
Technical characteristics of ZR-150A-260V
|Power line||380B, 50 Hz|
|Range of the stabilized charging current, And||5... 110|
|The rated voltage of the charged battery, In||5... 150|
|The maximum charge voltage, In||260|
|Power consumption, kW, no more||40|
|Overall dimensions, mm||550 h950 h1200|
|Weight, kg, no more||350|
Structurally charging and digit ZR-150A-260V device is executed in the form of a metal framework in which on guides structurally finished block - the converter executed on the basis of the unified standard design is installed; in the lower part of a framework the transformer is placed.
On the forward panel are installed the switch intended for inclusion of a power line ~ 380B and the indicator signaling about inclusion of a power line.
On the back panel plates on which inscriptions are put are established: serial number, name of a product, mass of a product, degree of protection. The ZR-150A-260V device is supplied an eye bolt and the grounding clip, tires intended for connection of AB.
On the front panel of the converter governing bodies and indications are located: the switch for protection of a power chain at the currents of the charge/category exceeding maximum, the toggle-switch for inclusion of the mode of a charge and the mode of the category, the start-up alarm system indicator, the voltmeter, the indicator of existence of supply voltage, a safety lock, buttons of the START-UP, STOP switch - start and a stop of the mode of the charge/category, the resistor for installation of current of the charge/category, the ampermeter, the overload alarm system indicator.
The principle of operation of the device is based on transformation of a three-phase alternating voltage in constant at a charge and on transformation of constant tension to a three-phase alternating voltage with recovery of energy in a network at the category.