- Customer pickup,
- In detail
- Country of manufactureRussia
- Maximum load16 Ton
- Working radius6 m
It is a column with a rotating bracket along which an electric hoist or manual drive.
The crane can be operated as a standalone device or together with other lifting or handling equipment. Jib cranes are often installed below the bridge crane and used simultaneously. Also, jib cranes are used in areas of industrial shops or in warehouses, where there is no opportunity to lay the rails or ceiling height does not allow the use of other cranes. In these cases, pay attention to mobile and stationary jib cranes.
This crane is ideal for warehouses, factory floors. It allows you to serve machines, moving from one to another. It does not take place on the floor and reduces the number of dead zones.
|Capacity, m.||to 16|
|mode group||1A - 5A|
|console, m fly||until 6|
|lifting height, m||until 6|
speed m / min.
In industries that involve lifting equipment most commonly used mode radio valve, since its use gives quite a number of tangible benefits.
If the production is operated by crane on the radio, it is possible to solve the following number of serious technological problems relating to the increase of the degree of efficiency and performance:
- There is no need to reduce the speed of the moving mechanisms and create the necessary conditions for free movement of the crane, especially on the ground, cluttered or equipment saturated building facilities or inventory from the warehouse;
- Speed and accuracy: the contractor fails to perform finishing operations faster, while the load is raised or lowered more accurately than in vremyakabinnogo positioning;
- Increased safety, improved working conditions;
- Simultaneity: during transportation of cargo, which is performed synchronously with two cranes, however, due to one crane control panel, provided as movement mechanisms for the simultaneous and inclusion;
- Cost: by reducing the number of "empty" runs the crane;
- Lower personnel costs: no need to pay for training and job - professional crane operator;
- Simplicity and ergonomics;
- Long range (up to 100 meters);
POWER CABLE FOR FLAT hoists "C" profile
Power supply system consists of cables suspended from the cable cars, and designed for different operating conditions, such as:
- indoors and outdoors;
- aggressive environment,
- Work outdoors,
- high humidity,
- work in an explosive or flammable environment.
CONTROL on separate bus systems with flat cable to "C" profile
The control unit moves the C - shaped rail along the bridge crane in an arbitrary manner irrespective of the place of the provisions of the lifting device.