- Country of manufactureRussia
- Maximum load16 Ton
- Load-lift capacity1-16 Ton
- Type of craneSingle-balk
|Pavement crane one-frame suspended|
|Loading capacity, t||1 - 16|
|Flight, m||single-span 3 - 15, two-flying from 7.5+7.5 to 15+15 (perhaps more by the special order)|
|Height of rise, m||6 - 36 (perhaps more by the special order)|
|Way of management||with a floor, radio control|
|Temperature condition in accordance with GOST 15150, °C||- 20+40 (-40+40)|
|Execution of the crane||common industrial, explosion-proof, fireproof|
|Operating mode in accordance with GOST 25546||3K, 4K, 5K|
|Climatic modification in accordance with GOST 15150||U1, U2, U3|
The crane beam suspended electric is used for performance of the widest range of loading and unloading works both in rooms, and on the open areas.
Structurally, the crane beam electric suspended consists of a flying beam and moving on it a waist (telfer), running carriages, the driving mechanism and the mechanism of management. As the additional equipment suspended electric the crane beam can be equipped with brake reducers. Depending on an installation site, a necessary scope of work and service conditions suspended electric the crane beam can be both single-span, and two-flying execution.
Loading capacity suspended the crane beams varies over a wide range and can reach 16 tons, and the average length of flight makes about 15 meters at a departure of consoles to one and a half meters. The design single-span electric the crane beam provides existence of two trailer beams, very often, with the special springing elements reducing vibrations at start and a stop of the mechanism of the drive. Unlike single-span, two-flying suspended electric the crane beam has three trailer beams that increases rigidity of a long design. In addition, two-flying suspended the crane beam has considerably the big area of coverage in comparison with single-span at equal loading capacity.
The design such crane beam provides it the high speed of work and maneuverability. Depending on loading capacity, suspended electric the crane beam are equipped with single and leading carts. And the number of the leading carts depends directly on the maximum weight with which the crane beam can work. So, for suspended electric the crane beams, no more than 3,2 tons calculated for work with freights, the number of the leading carts makes two on each trailer beam. In cases when loading capacity the suspended crane beam makes more than 5 tons, the number of the leading carts of each trailer beam increases to two and so on.
In addition, it should be noted that for ensuring steady contact of wheels of the cart with a surface two-flying electric the crane beams special balansirny carts are used. Also, for protection against a distortion and jammings in operating time, trailer beams suspended the crane beams are equipped with the persistent rollers moving on a wall of a subcrane way.
Telling about advantages suspended electric the crane beams, It should be noted much wider area of coverage in comparison with basic. In addition, suspended the crane beam is much cheaper in operation, than basic, in particular because of cheaper subcrane ways, and also the available possibility of replacement of the worn-out riding two-Tauris without dismantle of trailer beams. Besides, during installation there is no need to use an assembly column or the crane.