- Country of manufactureRussia
- Availability of CNCNo
- Type of machineDisk
Machines of the SM - 160 series carry out sawing up of dvukhkantny bars of various width and up to 160 mm high, distance between extreme saws of 350 mm.
Machines of the SM - 160 series make a cut of dvukhkantny bars up to 160 mm high. On machines about 10 circular saws, with a diameter up to 500 mm can be established. At a pileniye of a bar of smaller height, it is possible to use saws of smaller diameter - it allows to reduce width spent on drink and, therefore, to raise a percentage exit of ready timber. Saws have the frequency of rotation of 2200 rpm. , what is provided by high quality of the received material.
Speed of supply of material has three - stage adjustment: 4, 6, 9 meters per minute. Depending on load of saws, according to indications of the ampermeter, the optimum speed of giving is established. It allows to reach such operating mode at which the electric motor and saws work without overload in the optimum mode. As a result, service life of saws increases, and costs of their service are reduced.
The multisaw machine can work together with the brevnopilny machine, forming the uniform production line, or independently - as the machine of the second row.
The simple and reliable design of CM machines - 160 allows to work at them long time, at permanently high quality of the received production.
|Sort of current of a power line||variable three - phase
|Frequency of current, Hz||50|
|The used tension, In||380|
|Width of the processed material
it is not limited
|Thickness of the processed material
|Length of the processed material, mm, not less||1200|
|Speed of cutting, m/c, not less||56|
|Rated speed of giving, m/min||4, 6, 8|
|Quantity of saws, piece, no more||10|
|Distance between extreme saws, mm, no more||350|
|Diameter of saws, mm, the greatest||500|
|Nominal diameter of a landing neck under the tool, mm||50|
|Nominal distance from a floor to a working surface of a table, mm||820|
|Norm of service, persons||2|
|The reducer is worm||NRW - 0. 75 \ 60|
|Number of electric motors, piece||2|
|Electric motor of the main drive (saw shaft) rated power, kW||45|
|Nominal frequency of rotation, rpm||2950|
|The giving drive electric motor (the giving rollers):
|Total power of electric motors, kW * WITH a DIAMETER OF SAWS of 500||46, 1|
|Overall dimensions of the machine
|Overall dimensions of tables (2 pieces in a sheaf)