- BrandДарасунский завод горного оборудования
- Country of manufactureRussia
THE UNIT PROVIDES FRONT SLOT DRILLING IN OPENINGS WITH A SECTION OF 2.5 - 2.5 M2, AS WELL AS DRILLING BOREHOLES IN THE ROOF AT THE HEIGHT OF OUTPUTS MORE THAN 3.5M.
Installation drill shaft UBSH - 101 pneumatic - suspension intended for drilling when drilling the horizontal mine workings in rocks with the hardness of 8 - 20 according to GOST 21153.1 - 75. Setting the front faces provides drilling workings in section 2.5 - 2,5m2 and also drilling holes into the roof at a height of workings over 3.5 m.
According to the operating conditions in terms of the influence of climatic factors, the installation corresponds to the version U of placement category 5 according to GOST 15150 - 69.
The installation mechanizes all operations for guiding the feeder with a perforator to the drilling points and provides self - propelled power along horizontal mine workings, provided that compressed air is supplied to it.
Drilling area, m, not less than height from the supporting surface - 2.5
width - 2.5
Number of drilling machines - 1
Technical productivity of the installation, m / h, not less - 21
Drilling depth, m, not less - 2.2
Travel speed, km / h, not less - 3.0
The greatest angle of the overcome rise, deg. - 12
Minimum inner turning radius of the installation, m - 3.0
Overall dimensions of the unit in transport position, m, no more: width - 1.1
height - 1.4
length - 6.5
Weight, t, no more - 5