- Country of manufactureRussia
The drying complex is designed for drying small - fraction wood waste. The main raw materials are sawdust, shavings, small chips.Make a request
Drum drying complex BASK - 2
The drying complex is designed for drying small - fraction wood waste. The main raw materials are sawdust, shavings, small chips.
Fine - grained raw materials are fed into the hopper of the drying drum and into the hopper of the heat generator.
In the heat generator, the fuel is burned and mixed with air in the required proportion. In this way, a drying agent is formed and fed into the drying drum. Raw materials are fed into the receiving device of the drying drum by a scraper conveyor. The feed rate of the raw material into the drum is controlled in such a way that the moisture content of the raw material at the outlet from the drum is maintained at a predetermined level. In the dryer, the raw material dries up to a moisture content of 8 - 10% and is removed from it by a pneumatic cyclone with a built - in fan.
In the cyclone of pneumatic transport, the dried raw material is separated from the spent drying agent and is fed to the consumer through a sluice feeder.
The drum is single - pass by design. The dryer is equipped with an inertial ash collector that catches large particles carried away from the heat generator.
The heat generator is equipped with a fuel level sensor in the furnace and an automated fuel supply system. The automated fuel supply system, together with the regulation of the feed rate of the raw material into the drum, ensures the maintenance of the specified moisture content of the raw material at the outlet of the dryer and practically excludes the possibility of ignition in the dryer.
Main technical characteristics
|Description of characteristics||Value|
|Evaporated moisture capacity, t / h||2.5|
|Productivity for finished product with moisture 10% , t / h
|Raw materials||sawdust, shavings, wood chips (up to 20 mm along the fiber)|
|Maximum raw material humidity, relative / absolute, %||55/122|
|Raw material demand at 55% relative humidity, t / h||6.25|
|Complex dimensions, mxm||24.1 x 9.5|
|Complex height, m||7.8|
|Installed electrical power||83.4|
|Consumed electrical power||58.4|
|Directly service personnel||1 person per shift|
Equipment composition of the BASK - 2 complex:
Heat generator TG - 2.0 (2.5 MW)
Connecting flue gas duct TG - 2.0 - AVM - 1.5 complete with thermal insulation and gate (flue and gate made of heat - resistant steel)
Starting pipe dia. 350 mm
Mechanized bunker 2.3 m3
Scraper double - chain conveyor TC2 - 01 (for AVM - 1.5)
OMB branch pipe - 2,3 - conveyor
Conveyor branch pipe - preheater
Drying drum AVM - 1.5 (second - hand, restored, included: drum, support and drive station, pre - furnace with built - in ash catcher)
Connecting gas duct AVM - 1.5 - Cyclone D2400
Cyclone D - 2400 with sluice feeder D800
Cyclone2400 - Day - 11.2
Control gate 650x650 mm with electric drive
Exhaust fan DN - 11.2 (55 kW)
TG control cabinet - 2.0
Drum control cabinet
Control cabinet for cyclone D - 2400 and sluice feeder D - 800