- BrandМакил плюс
- Country of manufactureRussia
- Volume of loading100 m³
- Type of dryerConvective drying
The drying SKD - 100 complex on wood waste with the UVN - 400M heatgenerator.
The drying complex is intended for drying of timber by one - time loading of a drying chamber of 100 computer - controlled cubic meters, autonomous heat supply from the UVN heatunit.
The heat carrier is heated air which moves in a drying chamber from the heatunit the fan.
The drying chamber represents a modular and combined steel structure with a possibility of moving to other place. The framework consists of the profile elements covered after assembly with two layers of organo - silicate composition of OS - 12.
As wall and roofing elements are used a sandwich panel with a mineral - cotton heater density 110kg/m3. Wall and roofing panels have facings. External facings of panels are covered with polyester enamel. A class of fire resistance of the EI 60 panels that corresponds for external walls of the I degree of fire resistance of buildings.
The modular design allows to join additional modules that expands possibilities of a complex and significantly reduces the cost of the modernized complex. Chamber gate - tight, retractable on a lath with use of the mechanism of disclosure. Between a chamber and a furnace compartment where the UVN heatunit is placed, there is a door for service of a chamber during a drying cycle.
The thermoprotected axial reversive fans providing optimum necessary speed of movement of air through stacks of timber are installed in the SKD camera.
The ventilating system of giving and distribution of the heat carrier consists from: the forcing fan, axial reversive fans fixed on a frame under a drop ceiling, systems of forced - air and exhaust air ducts.
As fuel for the heatunit serves woodworking waste (sawdust, bark, cuts, a dead wood up to 2,5 m long, firewood), peat, etc. Preliminary crushing, sorting, and other preparation of fuel is not required. Fuel can move in a fire chamber in the mixed look, even with high degree of humidity (to 65% ) without preliminary subdrying. Installation is simple in service and is reliable in work, allows to utilize waste and to reduce cost of drying of timber. Loading - manual.
The automatic control system of drying of wood is made of the controller's modules. As a part of system there are 4 sensors of humidity of timber, one sensor of temperature. The software of system allows to carry out drying of various breeds and assortments of wood (a fir - tree, a pine, an oak, a birch, a larch). Control and management of work of the equipment is exercised by system of automatic equipment Active control of final humidity of timber - to 7% , and management is made on average value of humidity.