Electrohydraulic press of horizontal type
Advantages of an electrohydraulic press to art forging "MASTER Smith"
- Your "Master Smith" will allow to make elite and expensive shod products which cost from 9 000 rub for square meter. This lattice was estimated at 22 000 rub at the INTERSTROYEKSPO exhibition, St.-Petersburg, 2009. Its prime cost makes 1 100 rub.
- "Master Smith" during the work of 20 standard changes in a month makes productivity from 320 sq.m. of highly artistic elements.
The Master Smith machine has no analogs in the market of the forge equipment!
The press combines functionality of several machines for forging and are flexible. It is directly forge forging, and also decorative it is flexible, drawing the invoice, compression, an insertion, a punched hole, a klepka.
Dimensions and weight!
Weight only 941 kg while it carries out more than 20 various operations and at least 40 different elements.
Two operating modes of a press!
For effective work on the machine two modes are provided: cyclic and single.
An opportunity to set necessary pressure on the machine!
The wide choice of necessary pressure varies from 5 to 51 tons! With such functionality you produce more options of shod products!
The machine has open working areas and a pedal of foot start-up, it allows to control forging process bzopasno. Does not demand high qualification for work on the machine!
The machine is simple in use, all operations are technically primitive, but carry out highly artistic operations. Therefore you or to yours do not need qualification "smith" for work on this machine. Each machine is equipped with an apron for the smith. The quantity of the produced elements is not limited! You will be able always to order matrixes on your taste, thereby will expand the range of new elements.
Machine cost without matrixes in a set is specified. The machine is completed with matrixes at the choice of the customer. One couple of a matrix costs 10 000-15 000 rub.