Less than 1 year old on Allbiz
Enamel is a two - component composition consisting of a base and a hardener. The base is a suspension of pigments and polyurethane. The hardener is an aliphatic polyisocyanate.
The enamel is intended for protective and decorative painting of mechanical engineering, shipbuilding, rolling stock, railway products. platforms, including for mineral fertilizers, the outer surface of tanks for storing oil and oil products, hydraulic structures, bridges and metal structures for various purposes.
1) Practical coverage depends on layer thickness, application method and conditions, surface roughness and product shape.
2) The thickness of one layer on a vertical surface depends on the degree of dilution of the material, temperature, application method, surface roughness and product shape.
METHODS AND CONDITIONS OF APPLICATION
Before use, the enamel base is mixed with a hardener in the ratio specified in the quality document, after which it is thoroughly mixed and kept for 15–20 minutes at the application temperature. If necessary, dilution is carried out with a solvent for Akrus - Polyur enamel to a working viscosity according to a VZ - 246 viscometer with a nozzle diameter of 4 mm at a temperature of (20 ± 2) ° С:
- for application with a brush or roller up to 30 - 60s;
- for application by pneumatic spraying up to 20? 25 s.
The enamel is applied to the prepared (primed) surface in the temperature range of 5 - 300 C and at a relative humidity of the ambient air of no more than 80% by pneumatic spraying, brush, roller or airless spraying. The enamel made in the winter version is applied in the temperature range of minus 10? 200 C at a relative humidity of the ambient air of not more than 65% .
The material is flammable! Perform work with effective air exchange using personal protective equipment. Avoid inhalation and digestion. In case of contact with skin, wash immediately with warm water and soap. In case of contact with eyes, rinse with plenty of water. Store materials, following the warning notices on the label, indoors, excluding direct sunlight at an ambient temperature of minus 20 ° C to 30 ° C. Store the base and hardener only in a closed container, completely excluding the possibility of moisture getting into them.
Similar company products