Currency RUB
ENAMEL ML-12 buy in Chelyabinsk
Buy ENAMEL ML-12
ENAMEL ML-12

ENAMEL ML-12

Products from producer
In stock
Reconfirm the price with seller
Payment:
  • Cash,
  • Invoice payment,
  • Cash on delivery
  • In detail
Shipping:
Seller
Russia, Chelyabinsk
(View map)
+7(9 
Display phones
Less than 1 year old on Allbiz
Quickly responds
Technical characteristics
  • BrandФестПро
  • Country of manufactureRussia
Description

ENAMEL ML - 12

 

GOST 6631 - 74

Purpose: Hot drying enamel, the main purpose of which is to paint automotive equipment on a pre - primed metal surface, or primed and covered with an additional layer of putty. The enamel forms a highly hard glossy coating, which has significant resistance to water, oil, gasoline, ultraviolet light and temperatures from - 60 to + 60 ° C. The enamel surface has a rich color, it can be sanded and polished. Due to its properties, enamel is widely used for high - quality painting of various metal products used both in everyday life and in industry: appliances, household appliances, water pipes, air ducts, etc.

Composition: It is a suspension of pigments in solutions of alkyd and melamine - formaldehyde resins and organic solvents with the addition of targeted additives. Does not contain lead compounds and active solvents.

Specifications:

Indicator name

Norm according to GOST 6631 - 74

1. Coating color

various colors, including the RAL catalog, other colors - at the request of consumers

2. Drying time to degree 3 at a temperature of 130 - 135 ° C, min, no more

35

3. Recommended coating thickness, microns single / double layer

18 - 23 / 35 - 40

5. Recommended number of layers

1 - 2

6. Nominal viscosity according to the VZ - 246 viscometer with a nozzle diameter of 4 mm at a temperature of (20.0 + 0.5) oC,

70 - 100

Mass fraction of non - volatile substances, % depending on color

44 - 59

Grinding degree, micron, no more

ten

Hiding power of the dried film, g / m2

40 - 100

Flexural elasticity, mm, no more

3

Film strength upon impact on a U - 1 device, cm, not less

45

Film hardness according to the pendulum device of the TML type (pendulum A), rel. units, not less

0.21

Coating adhesion, points, no more

one

Film gloss, % , not less

58

Film resistance at a temperature of (20 + 2) оС to static action of liquids, h, not less:


water

 

48

gasoline

8

industrial oil

48

 

 

 

Material preparation: Before use, the enamel is thoroughly mixed using a mixing mechanized device according to GOST 9980.2 until a homogeneous state. The working viscosity is adjusted with xylene. If necessary, the enamel is filtered through a 01N - 02N mesh in accordance with GOST 6613. In the cold season, the enamel must be preheated to a positive temperature.

Surface preparation:

 The surface preparation technique and the characteristics of the paint system are determined by the technical regulations for the performance of work, agreed with the material manufacturer.

Coating system:

Primer V - KF (V - KCh) 18 - 23 microns thick; ML - 12 enamel - 2 layers with a thickness of 35 - 40 microns. Under operating conditions UHL11 retains its protective properties for 5 years, decorative - 3 years.

Application method: Airless and pneumatic spraying, mainly in an electrostatic field.

Colors: According to GOST or RAL colors

Drying time : One coat 18 - 23 microns thick. dries in 35 minutes at a temperature in a drying chamber at a temperature of 130 - 135 ° C. Natural drying is possible with the introduction of special catalysts.

Precautions: Observe the general safety rules applicable to work with flammable liquids.

Shelf life: 12 months at temperatures from - 40 to + 40 ° C.

Packing: Drums 57L, 25L.

Contact the seller
ENAMEL ML-12
ENAMEL ML-12
Shipping method
Payment method
Compare0
ClearSelected items: 0