- Country of manufactureRussia
Enamel road joint stock company 505 white
It is intended for drawing lines of safety on the carriageway of public highways with an asphalt concrete covering.
AK-505 enamel is made on the basis of acrylic dispersion with introduction of target additives. AK-505 enamel is intended for drawing lines of safety on the carriageway of public highways with an asphalt concrete covering. AK-505 enamel has high operational properties. Wear resistance is 2,5-3 times higher, than at traditionally applied paints and varnishes. Quickly dries. Practically there are no solvents. A possibility of drawing AK-505 a thick layer, and also on the damp surface of the road. AK-505 enamel is applied with a brush, the roller, a kraskoraspylitel and by means of special razmetochny cars. Provide a possibility of introduction of glass balls for increase in wear resistance and visibility days at night. It is desirable to put a marking in dry weather on dry, cleared of dirt and dust, to a paving. Putting enamel on an unprepared covering is not allowed. Mixing among themselves of enamels of different brands is not allowed. Washing of the razmetochny equipment is made by the R-4 solvent. It is forbidden to dilute enamel or to carry out washing of the equipment with water, gasoline, kerosene. Material is flammable! Not to work near open sources of fire. To perform works at good ventilation, in rubber gloves, with use of individual means of protection. Not to allow hit in respiratory organs and digestion. At hit of enamel on skin to wash out it warm water with soap. To protect from children!
|The producer -||Russia|