Equipment for the recycling of biowaste by dry extrusion

Commercial offer for equipment for the production line for the processing of organic waste by dry extrusion

- - level sensors with a lighting lamp installed in the line at the hopper (claim 17 in the diagram), the purpose - to control the amount of product in the container.

- - crusher production capacity for processing wheat

- - DUO - E - type metering device.

Information

 1.   Equipment for use with uncooked biowaste is better to install in a separate room with good ventilation, flooring resistant to moisture sink for draining the used water and liquid during separation. Should be carried out periodically disinfecting measures and washing equipment;

 2. The floor covering (for example tiles) and a drain for draining the water after washing must be at the installed equipment to claim 15 (turboekstruder);

 3.  Mixing of dry filler with meat - are arbitrary and must be calculated depending on the humidity of the mixed components such that the humidity in the working + fat mixture before feeding did not exceed 25 turboekstruder - 30% . Obviously, using the amount of dry filler separator can be reduced.

- an average separation without mixing ratio 1: 3 where 1 - is shredded biosyre and 3 - suhoy filler.

- after the separator a ratio of about 1: 2

 4. In the equipment is working parts to be replaced as needed (sieve and hammers crusher, sieve separator, the screws on turboekstruder and m. N. )

5.  The frequency of replacement of consumables depends on the quality of raw materials, proper operation of the equipment, and many other factors.

Resource some parts :

- a hammer mill - 250 - 300 tons;

- a rotor assembly - 1,200 tons;

- augers to turboekstruderu - 600 hours (at the order turboekstrudera with iron augers their resource threefold increased). (prices quoted on the relevant parts to December 2019).

Note

Term supply of equipment from 30 to 45 working days.

Terms of payment:

► 50% deposit of the total cost of the equipment;

► the remaining 50% of the equipment ready, but before delivery to the customer.

Delivery:

► transport company by the buyer;

► Pickup

The warranty on equipment "Expro M" 1 year.

Services installation supervision, start - up and training are made by a separate agreement.