Gripper for lifting sandwich panels ZSTu
- Invoice payment,
- Cash on delivery,
- L/C - Letter of Credit,
- D/P - Documents against Payment,
- D/A - Documents against acceptance
- In detail
- Customer pickup,
- Transport company
- In detail
- Country of manufactureRussia
Manufactured in accordance with the requirements of TR CU 010/2011, FNP PB OPO, TU 5225 - 007 - 55355339 - 2006.
Warranty period: 6 months from the date of commissioning in case of one - shift operation.
The gripper is designed for lifting and moving sandwich panels and similar loads during the construction of pre - fabricated buildings and structures. The design features of sandwich panels, namely the absence of technological holes, hinges, lugs, limit the use of a wide range of load - gripping mechanisms and devices.
The design of the gripper for the panels is based on the operation of the clamp, which allows you to adjust the compression force, rubber pads are also provided to protect the surface of the load from damage. The adjustable presser foot allows you to adjust the jaw of the gripper, this makes it possible to work with loads with a thickness of 50 to 250 mm (almost the entire size range of sandwich panels). The gripper allows you to move and place the panel as close to the supporting structure as possible.
The ZSTu version is characterized by a bolted connection of the presser foot to the gripper body. To increase the jaw of the gripper, it will be necessary to unscrew the bolt, therefore the gripper is recommended to be used for long - term work with loads of the same standard size.