- Country of manufactureTaiwan
Length of nails: 15 - 40 mm
Accumulator capacity: 4000 nails
Weight with the accumulator: 4,0 kg
|The expansion bolt shield nail on concrete||15 - 40 mm|
|Tilt angle of shop||0 °|
|Capacity of shop||30 nails|
|Energy of a shot||100 J|
|Accumulator type||Li-Ion - 1,5 Ah - 7,2V DC|
|Accumulator capacity||4000 shots|
|Capacity of a gas cylinder||1000 - 1400 shots|
|Sizes||375 x 335 x 110 mm|
|Weight with the accumulator||4,0 kg|
|Range of working temperature||from -15 ° to +50 °C|
Toua GSN50 is the most successful model for wiring in a line of the gas assembly guns Toua. The main feature of this tool is lack of a clamping bracket. In this modification the trunk carries out a role of the clamping mechanism protecting from "a shot in air". Thanks to it the gun has very compact sizes and can be used for installation of wide range of clips from various producers with a diameter from 16 mm. Existence of adjustment of deepening does a shot of this tool softer and reduces probability of splitting of plastic at installation of kabelkanal. The narrow trunk simplifies an aiming in an assembly opening.
All-construction installation to a concrete surface, to metal-rolling products and to a bricklaying. Wiring - installation of plastic clips, kabelkanal and raspayachny boxes. Installation of guides for gypsum cardboard and stretch ceilings, a plaster grid, waterproofing membranes, etc.
There is no clamping bracket - the compact trunk is the protective clamping mechanism that does this tool convenient for wiring.
Does not demand greasing, thanks to special mix of the liquefied gas and lubricants in a gas cylinder of Toua.
Wide range of working temperature - from -15 ° to +50 °C (with cylinders of 16 bars)
Big power when clogging nailing - allows to beat reliably a professional flooring as a fixed timbering to steel constructional beams of big section.
It is easy-to-work also service - does not demand preliminary skills.
Convenient and fast besklyuchevy adjustment of deepening nailing.
In a set 2 Li-Ion accumulators - allow to hammer up to 8000 nails without recharge from the power supply network.
Suspension with a possibility of a turn by 180 degrees - it is convenient to work for a belt both the left and right hand.
The accumulator indicator on the tool handle will report about need of recharge in advance.
The shock-resistant plastic case - will protect the tool in vremyatransportirovka.
|Rechargeable battery:||2 pieces.|
|Adapter 220V AC-6V DC:||1 pieces.|
|Plastic case:||1 pieces.|
|Zashchiteny points:||1 pieces.|