- Country of manufactureTaiwan
Length of nails: 50 - 90 mm
Accumulator capacity: 4000 nails
Weight with the accumulator: 3,7 kg
|Rack nails on the paper cartridge||50 - 90 mm|
|Tilt angle of the cartridge of nails||30 ° - 34 °|
|Capacity of shop||48 nails|
|Energy of a shot||80 J|
|Accumulator type||Li-Ion - 1,5 Ah - 7,2V DC|
|Accumulator capacity||4000 shots|
|Capacity of a gas cylinder||to 1500 shots|
|Sizes||384 x 338 x 107 mm|
|Weight with the accumulator||3,7 kg|
|Range of working temperature||from -15 ° to +50 °C|
The gas neyler (gvozdezabivny the gun) for frame works is intended for autonomous work with nails on the paper cartridge from 50 mm to 90 mm long. This model of a gvozdezabivatel does not require the compressor or connection to the power supply network.
Professional neyler for assembly of wooden designs, obreshetka and packings. It is widely applied in wooden housing construction to assembly of frameworks, at arrangement of a roof and rafter systems, and also to installation of plywood and dvp plates to wooden designs.
The Li-Ion accumulator has a bigger resource on zayada-category cycles.
Does not demand greasing, thanks to special mix of the liquefied gas and lubricants in a gas cylinder of Toua.
Wide range of working temperature - from -15 ° to +50 °C (with cylinders of 16 bars).
It is easy-to-work also service - does not demand preliminary skills.
Convenient and fast besklyuchevy adjustment of deepening nailing.
In a set 2 accumulators - allow to hammer up to 8000 nails without recharge from the power supply network.
Suspension with a possibility of a turn by 180 degrees - it is convenient to work for a belt both the left and right hand.
The accumulator indicator on the tool handle will report about need of recharge in advance.
The shock-resistant plastic case - will protect the tool during transportation.
|Rechargeable battery:||2 pieces.|
|AC-DC adapter:||1 pieces.|
|Plastic case:||1 pieces.|