Currency RUB
KTsD 20 well bottom plate buy in Ekaterinburg
Buy KTsD 20 well bottom plate
KTsD 20 well bottom plate
6f4993e478

KTsD 20 well bottom plate

In stock
Reconfirm the price with seller
Shipping:
Seller
Russia, Ekaterinburg
(View map)
Technical characteristics
  • BrandЖБИ
  • Country of manufactureRussia
Description
KTsD 20 well bottom plate
Length: 2500 Width: 2500 Height: 120 Concrete volume: 0,59 Weight: 1470 State standard specification/a Series: GOST 8020-90 Series 3.900.1-14-Standard project 902-09-46.88. Plates of the bottom of wells

KTsD 20 well bottom plate

 - - - - - - - - - - - The well bottom plate (a plate lower a well) KTsD 20 represents the reinforced concrete product intended for arrangement of various designs of well type including when laying the sewer networks and other engineering communications located underground. Also they are applied to construction viewing, gazo-and water wells.

 - - - - - - - - - - - Marking

 - - - - - - - - - - - As well as all other products used at construction of designs of general purpose of the bottom of a well have to be standardized. For this purpose each product is marked at a production phase. Marking of the bottom of a well of KTsD 20 consists of a digital-alphabetic reference where:

  • KTsD - - a well bottom plate -
  • The 1st figure - diameter of the working chamber leaning on a plate in dm.

 - - - - - - - - - - - Production and composition of material

 - - - - - - - - - - - By production of plates of the bottom of KTsD 20 the high-strength concrete of the M200-M500 brand possessing frost resistance not below F400 and water tightness of not less W4 is used. The well bottoms reinforced concrete are made by a vibropressing method.

 - - - - - - - - - - - For giving of concrete goods to products of a bigger durability, each of them is reinforced by a framework from the strengthened class steel - AI-III, AT-IIIC and AT-IVC. All metal elements, including mortgage loops, are processed by anticorrosive structures. Production of KTsD 20 has to conform to state standard specification 8020-90 and requirements of a series 3.900-3, release 7.

 - - - - - - - - - - - The Industry of Concrete Goods company offers the well bottoms the concrete KTsD 20 made in strict accordance with standard requirements that is confirmed with the corresponding passports.

 - - - - - - - - - - - Quality control

 - - - - - - - - - - - Each product is exposed to careful control at all production phases, beginning from the choice of raw materials and finishing with registration of the passport of each party. On KTsD 20 existence of the bared fittings, cracks, chips and sinks as the slightest deviation from technology can lead to a collapse of the well experiencing enormous strain is not allowed.

 - - - - - - - - - - - Technical characteristics

  • diameter of a plate - 2500 mm -
  • height - 120 mm -
  • concrete volume - 0,59 cubic m -
  • weight - 1470 kg. - - - - - - - - - - -

 - - - - - - - - - - - Scope of application

 - - - - - - - - - - - Plates of the bottom of a well of KTsD 20 are applied as protection of underground wells of different function, including sewer, water, pipeline, viewing etc., from hit of ground waters inside. Also lower plate of a well of KTsD 20 prevents subsidence and a distortion of a design. Together with the bottoms such elements of wells as covers and rings of wells are used.

 - - - - - - - - - - - Plates of the bottom of KTsD 20 are steady against low temperatures, hostile environment and high weight loadings therefore they can be used in any climatic conditions, types of soil and districts with high seismic activity. They are not deformed under the influence of external factors and are capable to carry out the functions within long years.

 - - - - - - - - - - - Features of installation

 - - - - - - - - - - - Construction of wells by means of the bottoms of a well of KTsD 20 differs in the high speed and convenience of installation. In order that soil and water at operation did not get to a well, rings of wells establish on KTsD 20 bottom plate. Joints between a ring and the lower plate are filled with cement mortar and carefully pressurized. If necessary on an internal wall of a well by means of metal brackets the ladder is equipped.

 - - - - - - - - - - - Transportation and storage

 - - - - - - - - - - - Plates of the bottom of KTsD 20 are stored and transported in stacks no more than eight layers high. At the same time between layers existence of laying which thickness makes not less than 40 mm is obligatory. When transporting the special attention follows reliable fastening of concrete goods of products.

 - - - - - - - - - - - To buy the plates of the bottoms of wells of KTsD 20 meeting all standard requirements you can in the Industry of Concrete Goods company.

$ (document) .ready (function () { redyUSSfoto ($ ('a.enlarge_image_inside'), false, 'eshop') - }) -

Well bottom plate

 - - - - - - - - - - - Well bottom plates (the lower plate of a well) represent the combined reinforced concrete products intended for arrangement of various designs of well type including when laying the sewer networks and other engineering communications located underground. Also they are applied to construction viewing, gazo-and water wells.

Features of a design and production

 - - - - - - - - - - - The reinforced concrete bottoms of a well of various configurations differ among themselves on diameter, thickness, settlement loading and weight. As these products in use experience serious strain, by their production the strongest heavy concrete of the M200-M500 brands having a class of frost resistance is used is not lower than F400 and water tightness from W4.

 - - - - - - - - - - - Production of plates of the bottom of a well is based on a vibropressing method thanks to what the finished product differs in special reliability. For giving to the bottoms of a bigger durability, each of them is reinforced by the frame design made of a steel wire with a diameter of 6-10 mm. All elements of plates of the bottoms are exposed to processing by protective structures. As production of plates of the bottom is carried out exclusively industrially, it has to meet all requirements of GOST 8020-90.

 - - - - - - - - - - - The well bottom plates offered by the Industry of Concrete Goods company conform to all standard requirements that is confirmed by the corresponding quality certificates by which each party is followed.

 - - - - - - - - - - - Marking

 - - - - - - - - - - - As well as all other products used at construction of designs of general purpose of a plate of the bottoms of wells have to be standardized. For this purpose each product is marked at a production phase. Marking of the bottoms of a well consists of a digital-alphabetic reference where:

  • PN (KTsD, the personal computer) - a plate lower a well (the well bottom) -
  • The 1st figure - number of a standard size -
  • The 2nd figure - diameter of a plate -
  • The 3rd figure - type of the bearing ability of a plate.

 - - - - - - - - - - - Properties of plates of the bottom of wells and feature of their application in construction

 - - - - - - - - - - - Plates of the bottoms of a well are applied as protection of underground wells of different function, including sewer, water, pipeline, viewing etc., from hit of ground waters inside. Together with the bottoms such elements of wells as plates of overlapping and a ring of wells are used.

 - - - - - - - - - - - As the well bottoms concrete are operated in difficult conditions, they have to possess such technical characteristics as resistance to low temperatures and differences of temperatures, resistance to weight loadings and pressure from soil, Paro - and moisture-proofness, full tightness, ecological safety and durability.

 - - - - - - - - - - - To buy the well bottom plates possessing all specified properties and made in strict accordance with GOST you can in the Industry of Concrete Goods company.

Contact the seller
KTsD 20 well bottom plate
KTsD 20 well bottom plate
Shipping method
Compare0
ClearSelected items: 0