Currency RUB
Machine formatno-raskroyechny kruglopilny UNICA 500 E buy in Novosibirsk
Buy Machine formatno-raskroyechny kruglopilny UNICA 500 E
Machine formatno-raskroyechny kruglopilny UNICA 500 E

Machine formatno-raskroyechny kruglopilny UNICA 500 E

In stock
Reconfirm the price with seller
Shipping:
Seller
Russia, Novosibirsk
(View map)
Technical characteristics
  • BrandGriggio
  • Country of manufactureItaly
  • Plant manufacturerGriggio
  • Type of machine feedУточняйте
  • Availability of CNCNo
Description

Machine formatno-raskroyechny kruglopilny UNICA 500 E

Hi-tech formatno-raskroyechny machine of new generation. It is intended for piece and package cutting of the slabby materials including revetted with a laminate. The machine is designed for use under trying conditions of work, perfectly proved in large-lot and mass production. It is distinguished by the highest reliability and a large supply of durability.

The long aluminum carriage and wide cross table allow to establish sheets of a big format and to move them rather saw mechanism. The design of saw knot allows to cut out sheets of the laminated chipboard without chips.

Are included in the basic package:

- Direct start of the motor.
- Electric raising of a saw.
- Electric inclination of a saw.
- Electronic counters of rise and inclination of a saw.
- The cutting knot 2 axes with electric adjustment, at turning on of the machine rises at switching off falls under a table.
- The aluminum carriage with cylindrical guides from steel of high precision on rollers.
- The carriage from the anodized profiles.
- Aluminum persistent range +30/-45 hail.
- A telescopic persistent ruler on the format carriage of the increased section, lenses with illumination.
- A parallel persistent ruler with micrometric adjustment.
- Adjustment of speed of a saw on a table.
- Fast positioning to the directing format carriage on 90-5-10-15-20-22, 5-25-30-35-40-45 hail.
- The protection device of a saw on the wedging knife for dia. 315 mm (for the bigger diameter of a saw of a trebuyets to order parallelogramny protection).
- 5 emphasis of fast positioning of tags on a telescopic guide.
- The centralized greasing of system of raising of all saw knot.
- Double withdrawal of aspiration: from the main saw and from a cutting saw.
- Electric standard "E".

Technical characteristics

Parameter Value
Carriage width: 385 mm
Carriage length at choice: 2600-3200-3800-4300 mm
Cutting length with the carriage of 2600 mm 2700 mm
Cutting length with the carriage of 3200 mm 3260 mm
Cutting length with the carriage of 3800 mm 3870 mm
Cutting length with the carriage of 4300 mm 4370 mm
Diameter of the main saw (baz. computer.) 450 mm
Diameter of a cutting saw 125 mm
4 speeds of rotation of a shaft of a saw 3000-4000-5000-6000 rpm
Cut height at the 90th a hail 154 mm
Cut height at the 45th a hail 105 mm
Saw tilt angle 0 - 46th hail.
Cut width 1250 mm
2 aspiration openings to dia. on 120 mm
Power of the main motor 7,5 hp
Net weight 980 kg
Overall dimension 3300х3360х930 mm
The size in packing 3400х1200х1115 mm

Options

  • The standard of EN with a brake.
  • Possibility of work with a saw of 500 mm (and 600 mm).
  • The machine without cutting saw.
  • Electronic visualization of cutting knot 2 axes (UNICA 500 PROGRAM) of 5,7 inches.
  • Cutting knot 3 axes with electric adjustment and electronic display. It is equipped with a double adjustable saw from 2,8 to 3,8 mm (UNICA 500 PROGRAM)
  • Cutting knot 2 axes with the programmed adjustment (UNICA 500 PROGRAM)
  • Cutting knot 3 axes with the programmed adjustment (UNICA 500 PROGRAM)
    It is equipped with a double adjustable saw from 2,8 to 3,8 mm.
  • Double adjustable cutting saw of "CD".
    * cutting knot with a double saw - adjustment distance between 2 saws with increase up to 0,05 mm without use of keys.
    * adjustment of thickness of a saw of min. 2,8 mm / mask 3,6 mm.
    * it is equipped with a double saw.
  • Ensuring installation of the ARDIS system of 5,7-10 inches.
    * (UNICA 500 PROGRAM with VIDEO of 5,7-10 inches.)
    Possibility of installation of the ARDIS program of optimization of cuts of preparation.
  • Ensuring installation of the ARDIS system of 12 inches.
    * (UNICA 500 PROGRAM with VIDEO of 5,7-10 inches). Possibility of installation of the ARDIS program of optimization of cuts of preparation. The system is equipped with 4 USB portals for input of parameters, connection with the keyboard, a mouse, the printing device and a portal for transfer of parameters on a network.
  • Possibility of installation of the carriage of 2600 mm (cutting width with cutting knot of 2700 mm)
  • Possibility of installation of a kareka of 3800 mm (cutting width with cutting knot of 3870 mm)
  • Possibility of installation of the carriage of 4300 mm (cutting width with cutting knot of 4370 mm)
  • Opportunity establishment of DIGIT on the mobile carriage
    Possibility of installation of a pozitsionator of DIGIT with direct start on the mobile carriage (DIGIT 1-2-3)
  • Start on the aluminum carriage.
  • Automatic start star triangle.
  • Electronic visualizer of raising of a saw (DIGIT 1)
  • Electronic visualizer of an inclination of a saw (UNICA 500)
  • Pneumatic replacement of a belt
  • Pneumatic clip of 3200 mm. Useful width of preparation is 3050 mm
  • Double emphasis for a cut at an angle the 45th hail.
  • Eccentric screw clip.
  • Prefix for parallel cuts.
  • Prefix for parallel cuts with elektr. visualizer.
  • Expansion of a table at the exit (UNICA 500-UNICA 500E-UNICA 500 DIGIT)
  • Width of a cut is 1500 mm (UNICA 500-UNICA 500E-UNICA 500 DIGIT 2)
  • Electronic sensor of a parallel emphasis.
    With eccentric blocking and micrometric adjustment.
  • Smooth adjustment of speed from 2000 to 6000 rpm.
  • Rotary format carriage-50/+50 hail.
    With telescopic expansion of 470 mm
  • The inclined format carriage with a visualizer-50/+50 hail
    It is equipped:
    - digital visualizer of an inclination of the format carriage
    - 2 electronic sensors of provision of an emphasis on a telescopic guide
    * 1 sensor for an emphasis
    * the sensor a schityvniya of parameters from a magnetic tape
    * telescopic expansion of 470 mm
  • 2 electronic counters for udlin. telescope. guide
    The extended telescopic alyuminevy guide for the format carriage with 2 electronic counters for positioning of an emphasis:
    * the counter for the 1st and 2nd emphasis with independent positioning.
    * the counter for the 3rd sliding emphasis.
    * reading from a magnetic strip.
  • Telescopic extender 750 max. For the format carriage.
  • Second format table.
  • Parallelogrammny protection of a saw of 'CE'.
  • The wedging knife of 2,8 mm (for a saw to dia. 300 mm)
  • Visualization of speed on the display
  • The laser for optimization of a cut on parallelogrammny protection.
  • Rotary hinged panet an ex. (UNICA 500-UNICA 500E-DIGIT)
    - lekhko cleans up from a working zone for simplification of a zagrkzka of big preparations.
    - contains start buttons.
    - electronic indicator of a tilt angle of a saw.
  • Set for a mill 15 x 200 mm
  • Double cutting saw of WIDIA to dia. 125 mm (Z 12+12 thickness of tooth is 3,1/3,9 mm)
  • Double cutting saw of WIDIA for cutting knot with 3 axes.
    (Z 12+12 thickness of tooth is 2,8/3,8 mm)
  • Main saw of WIDIA to dia. 300 mm
  • Main saw of WIDIA to dia. 350 mm (Z 84 thickness of tooth is 3,5 mm)
  • Main saw of WIDIA to dia. 400 mm (Z 60 thickness of tooth is 3,8 mm)
  • Main saw of WIDIA to dia. 450 mm (Z 66 thickness of tooth is 4,2 mm)
  • The motor of 10 hp (7,5 kW) of 50 Hz With automatic start a star a triangle.
  • The motor of 15 hp (11 kW) of 50 Hz With automatic start a star a triangle.
Contact the seller
Machine formatno-raskroyechny kruglopilny UNICA 500 E
Machine formatno-raskroyechny kruglopilny UNICA 500 E
We recommend to see
Shipping method
Compare0
ClearSelected items: 0