- Country of manufactureRussia
- Availability of CNCNo
- Type of machineDisk
Machine multisaw TsMD - 200, el/dv V=45 kW
The machine multisaw TsMD - 200 is intended for cutting of dvukhkantny bars up to 200 mm high, equipped with the 45 kW electric motor of the main drive.
Machines of the TsMD - 200 series make a cut of dvukhkantny and trekhkantny bars up to 200 mm high. On machines about 10 circular saws, with a diameter up to 630 mm can be established. At a pileniye of a bar of smaller height, it is possible to use saws of smaller diameter - it allows to reduce width spent on drink and, therefore, to raise a percentage exit of ready timber. Saws have the frequency of rotation of 2850 rpm. , what is provided by high quality of the received material.
Speed of supply of material has smooth adjustment. Depending on load of saws, according to indications of the ampermeter, the optimum speed of giving is established. It allows to reach such operating mode at which the electric motor and saws work without overload in the optimum mode. As a result, service life of saws increases, and costs of their service are reduced.
The multisaw machine can work together with the brevnopilny machine, forming the uniform production line, or independently - as the machine of the second row.
The simple and reliable design of TsMD - 200 machines allows to work at them long time, at permanently high quality of the received production.
|Sort of current of a power line||variable three - phase
|Frequency of current, Hz||50|
|The used tension, In||380|
|Width of the processed material
|Thickness of the processed material
150 - 200
|Length of the processed material, mm, not less||1000|
|Speed of cutting, m/c, not less||74|
|Rated speed of giving, m/min||4, 6, 9|
|Quantity of saws, piece, no more||12|
|Distance between extreme saws, mm, no more||430|
|Diameter of saws, mm, the greatest||630|
|Nominal diameter of a landing neck under the tool, mm||50|
|Nominal distance from a floor to a working surface of a table, mm||910|
|Norm of service, persons||2|
|The reducer is worm||CH - 80 - 40 - 51 - U2|
|Number of electric motors, piece||2|
|Electric motor of the main drive (saw shaft) rated power, kW||45|
|Nominal frequency of rotation, rpm||2850|
|The giving drive electric motor (giving ryabukh):
|Total power of electric motors, kW * WITH a DIAMETER OF SAWS of 630||45, 55|
|Overall dimensions of the machine