- Country of manufactureRussia
- Availability of CNCNo
The main task of this machine is receiving a cut board. Trimming of edges is carried out automatically for one working operation.
The main task of this machine is receiving a cut board. Trimming of edges is made automatically without additional participation of service personnel for one working operation!
Regulation of width of cutting of edges of ot50do 150 mm
On the machine three speeds of giving which easily change depending on the cut material.
All this gives to the machine universality.
- the original design with two giving flanges guarantees reliable giving of not cut board via the machine;
- the clip of a board is carried out by improvised freight (bricks) and reliably holds preparation in a zone of cutting of edges;
- at the exit from the machine the cut board having four processed parties turns out;
- the received board has excellent quality of a cut and high precision of given sizes.
|Sort of current of a power line||variable|
|Frequency of current, Hz||50|
|The used tension, In||380|
|The sizes of the processed material
it is not limited
|The board is cut||from 50 to 150 mm|
|Number of electric motors||1 pieces - 11 kW, 1 piece - 0, 55 kW|
|Diameter of a shaft of the machine, mm||50|
|Diameter of a circular saw, mm||450 (2 pieces)|
|Speed of giving, m/min||9, 12, 14|
|The reducer is worm||NRW - 0. 75 \ 60|
|Frequency of rotation of saw disks, rpm||3000|
|Overall dimensions of the three - saw machine