Currency RUB
Manufactured goods vans HINO 500 buy in Miass
Buy Manufactured goods vans HINO 500
Manufactured goods vans HINO 500
promtovarnyj_furgon_hino_500
promtovarnyj_furgon_hino_500

Manufactured goods vans HINO 500

Products from producer
In stock
Reconfirm the price with seller
For example: +7(50)123-45-67
Shipping:
Russia, Miass
(View map)
+7(3 
Display phones
5
5 years on Allbiz
Quickly responds
Technical characteristics
  • Country of manufactureRussia
  • Type of vanManufactured goods
Description
Manufactured goods vans

Lorries general transport destination for transporting general cargo, requiring no special temperature conditions

Budget solution for transportation of people's industrial goods are vehicles with frame wagons. High quality manufactured goods GIRD - vans is achieved by using only certified original parts and high - tech equipment.

Features

  • The frame structure consists of a steel, the profiled pipe which, as well as the subframe is subjected to shot peened and painted with two component paint import.
  • The frame is encased with the polymer coating galvanized metal of b = 0.55.
  • The wagon frame is anodized aluminum corner 90 × 60.
  • In the manufacture of doors (. Opening angle of 270 degrees) used imported components: rubber and plastic seal, locking rod, locks the door in the open position.

Additionally

If necessary, the wagon type may be insulated. As a heater used stiropen. As the material of the stiffening used water - resistant plywood (4 mm).

Technical characteristics of the chassis

Specifications Base chassis HINO 500 GD8JLSA
Maximum authorized mass of the chassis 12000
Front axle load 4500
The load on the rear axle 8500
Chassis Weight, kg 8005
Engine

J08E - TL (Euro 4)

Engine capacity 7684 cm 3 / (191 260) / 2500
Fuel tank capacity 200 l
Wheelbase 4850

description of the superstructure

 


 

Length

Width

Height

External body dimensions

7400 mm

2550mm

2600mm

Ext. body dimensions:

7305 mm

2410 mm

2455 mm

The internal volume, m. Cu.

43

Capacity pallets, pcs.

18

The top, front and side panels

The frame of steel tubes of rectangular cross section, with a paint coating, encased sandwich panels consisting of:

- galvanized sheet coated RAL 9003

- 4mm plywood.

doors

Sandwich panel 40 mm:

Galvanized sheet coated RAL 9003

plywood 4mm

Insulation Stiropen 50

plywood 4mm

Galvanized sheet coated RAL 9003

Bottom

The frame of steel tubes of rectangular cross section, with a paint coating.

The laminated plywood - slip 21 mm.

subframe

Steel, paint (with priming)

Seal the door opening

On rubber - plastic basis.

van framing

outside - galvanized profile with powder RAL 9003 color.

findings

Galvanized steel

provided

 


 

- two locking rod on each door.

- baffle strip inside the van height 300 mm galvanized steel

- Rake rigging for lashing - number 1 on the side walls.

- on every door - a container - type lock

- the rear underride bar, rubber bumpers

- recessed interior light body (on / off, opening the doors of the limit switch machine type. ).

- parking lights

- plastic fenders with mudguards

- lateral protection

- secure access to the van

Shipping method
Contact the seller
Manufactured goods vans HINO 500
Manufactured goods vans HINO 500
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Compare0
ClearSelected items: 0