- Country of manufactureBelarus
- ColorIn assortment
Scope: azure intended to colorless or tinted protective and decorative finishing interior elements: walls, ceilings, panels, beams, skirting boards, window frames, doors and other articles of different kinds of wood. Azure can be used for protective and decorative finishes of furniture.
Azure's release of two types: colorless and colored. Azure different colors are allowed to mix with each other to produce
the desired color.
Azure has the following advantages:
- dry quickly;
- easy to apply;
- forming a coating with a matt silk luster, texture and tone preserving
Wood (colorless glaze), or giving it a different color shades, including
simulating valuable wood: walnut, oak, teak, etc. (blue color); . .
- do not have a particular smell.
Surface preparation: the preparation of new, previously unpainted surfaces can include several steps depending on the tree structure: cleaning, if necessary, the surface of protruding materials (resin and pitching) with a cloth dampened nephras S4 - 150 / 200 (white spirit) ; grinding along the wood grain;
putty wood defects (knots, bumps, joints); Final sanding and dust removal. Stopper on the surface is necessary to conduct a test application on the blue check its compatibility with the filler. Applying to previously painted surface is allowed only after establishing the compatibility with a base and the obtained decorative effect evaluation test method vykraski. For this purpose, previously painted surface must be thoroughly cleaned from fragile layers of old coatings sanded until haze dedusted and perform tests azure small surface area. Humidity wooden surfaces should be 8 - 14% . The color intensity of the coating and its hue largely depend on the type of wood, its porosity, surface quality and quantity of deposited layers. To align the absorbency of the timber may be used primer composition of colorless blue diluted with water in ratio 1: 1 or primer composition of corresponding colored blue, diluted with water 1: 2 it should recognize that using a color of the primer composition of the coating color may be slightly darker expected. Drying time of the primer composition should be at least 1 hour at a temperature (20 ± 2) ° C and 65% relative humidity. The primer layer is sanded sandpaper № 5 - 6 and purified from dust. For lighter shades (as compared to those offered in the catalog), blue can be diluted with water or colorless azure. The latter is more preferable because it does not change the initial properties of the material. If you need an intense and coating color, blue is applied in several layers. Glazing surface several thin layers provides a more uniform color coating than a thick layer. Thin layers dry quickly and evenly without forming streaks. In order not to be seen at joints color, large in size is recommended to cover the surface of the continuous movement of the tool from side to side, and the entire surface of the whole at once. To obtain a uniform blue coating must be applied in the longitudinal direction (along the wood grain) continuously throughout the length of the painted surface. large in size is recommended to cover the surface of the continuous movement of the tool from side to side, and the entire surface of the whole at once. To obtain a uniform blue coating must be applied in the longitudinal direction (along the wood grain) continuously throughout the length of the painted surface. large in size is recommended to cover the surface of the continuous movement of the tool from side to side, and the entire surface of the whole at once. To obtain a uniform blue coating must be applied in the longitudinal direction (along the wood grain) continuously throughout the length of the painted surface.
Coating: should be mixed gently prior to use blue and let stand for 30 minutes to remove air bubbles. In the prepared product glazes applied by pneumatic spraying or brushing. The recommended thickness of the single layer wet coating of 120 - 150 microns. The drying time of each layer of blue - at least 1 hour at a temperature (20 ± 2) ° C and 65% relative humidity. At lower temperatures and high humidity, the drying time may be increased. The dwell time of the finished coating before use - not less than 48 hours. Azure recommended to apply at ambient temperature, the painting material
and the surface not below 15 ° C. It is not allowed to mix with other blue paint and solvents of any kind.
Consumption: theoretical coverage glazes for single coat wet film thickness of 120 - 150 microns is 70 - 90 g / m2, excluding the application method, absorbency and surface roughness, color coating, staff, and other factors. More precisely, consumption is determined by a test dyeing. Transportation and Storage: GOST 9980.5. Azure stored in closed warehouses at ambient temperature from + 5 ° C to plus 35 ° C. Do not allow direct sunlight. In the winter time blues transported in insulated truck.
Precautions: According to the degree of impact on the human body are blue hazard class 4 according to GOST 12.1.007. Azure water dispersion on wood fire and explosion. Persons related to the paint work must be provided with personal protective equipment (overalls, safety glasses, rubber gloves). In case of contact glazes eyes, mucous membranes and skin
rinse with plenty of water. At the end of the container, tools, wash with soap and water before drying Azura. After hardening deposit glazes and empty plastic bottles disposed of as
household waste. The dried coating has no toxic effects on the human body.
Warranty period: 12 months from date of manufacture.