Mastic roofing bituminous and rubber cold "SID
- 138 RUB/kg. - from 20 kg.
- Customer pickup,
- In detail
- Country of manufactureRussia
- Type of masticBitumen-rubber
MASTIC ROOFING BITUMINOUS AND RUBBER COLD "CYD"
It is intended for repair of all types of roofs, sealing of places of adjunctions, seal of seams and cracks of roofing coverings. After drying forms a high-strength covering with a wide range of temperatures of operation.
Average expense: 3,3 - 4,3 kg/sq.m.
Work temperature: from - 10:C to + 40:C. At a temperature below + 5:C, mastic needs to be sustained previously at the room temperature not less days.
It is necessary to store mastic in packed form in the dry, protected from sunshine place, at a temperature from - 20:C to +30:s.tara with material it has to be densely corked. In order to avoid jelling opening of a container until the use is not allowed. In case of an incomplete expense of contents the rest of material has to be again densely corked.
Not to apply near sources of naked flame. At work to provide good ventilation. Not to apply in premises. It is recommended to carry out works in gloves. At hit on skin mastic needs to be washed away solvent.
ROOFING MASTIC BITUMINOUS AND RUBBER "CYD"
- forms a monolithic waterproofing course
- reliably protects from leakages
- raises roof service life
Method of application:
1. Before application to mix.
2. To clear a surface of pollution, dust, dirt, fat spots.
3. Porous surfaces need to be impregnated with the Primer bituminous.
4. Time of drying of one layer of mastic about 12 hours. The layer is considered dried if its surface is not sticky.
Restoration of old topping. If it is necessary to restore old topping on a roof, mastic is applied in one layer 1-1,5 mm thick, and from above on a wet layer distribute topping.
Repair of a roof.
To open defective sites of a roof with an envelope, to dry, put a primer and after its drying by the pallet to apply mastic with a layer 0,5-1 mm thick, to stick together the ends of "envelope" before emergence of mastic from seams. To patch from rolled material or by means of the reinforced mastic layer so that the patch blocked the place of damage on 100 mm on all parties.
Sealing of adjunctions.
When sealing adjunctions mastic is applied on the prepared surface with a brush and in case of need reinforced by a strip from a steklomaterial with overlaps on the parties on 100 mm. From above the layer of mastic is put and protected from UF-radiation by topping or reflecting mastikoy.r
Time of a final set of properties of 7 days.