- Country of manufactureRussia
Medogonka hordialnaya-radial "Medunitsa of 30х60 Kombi of the Car" to ten frame with the electric drive.
On this medogonka it is possible to pump out for one rolling:
In the hordealny mode.
1. It is given the rest (435х300 mm.) - 10 frames.
2. It is given the rest (a semi-framework of 435х145 mm.) - 20 frames.
3. Rue (435х300 mm.) - 10 frames.
In the radial mode.
1. It is given the rest (435х300 mm.) - 30 frames.
2. It is given the rest (a semi-framework of 435х145 mm.) - 60 frames.
3. Rue (435х300 mm.) - 60 frames.
In this medogonka the electric drive - on means of the belt drive is used. Connection of a rotor of a medogonka with the drive is carried out by simple installation of a tetrahedron of a rotor in a drive nest that allows to remove or establish by one movement a medogonka. It is very convenient during the transporting or service of a medogonka. At this medogonka the drive together with the engine is taken out on a support and is directly under a working tank that does not disturb in work and does a medogonka more compact.
Pumping is made in the automatic mode. Medogonka the automatic machine can also cope as in manual, and completely in the automatic mode. In computer-controlled medogonka smooth changes of frequency, the direction of rotation of a rotor and other operating modes is set by the user by means of the corresponding setting up programs of the electronic panel of touch type. For this purpose to transfer a medogonka to the radial mode, it is necessary to remove cartridges from a rotor. Then a framework establishes in grooves of a rotor and makes pumping in the chosen mode.
All details of a medogonka contacting to honey are made of food stainless steel of the AISI 304 brand.
|Material||AISI 304 stainless steel|
|Number of a frames hordialno||10/20 pieces.|
|Number of a frames radially||30/60 pieces.|
|Productivity||60/120 frames an hour.|
|Speed of rotation of a rotor, is regulated||from 0 to 350 rpm.|
|The drive is electric||220 Century.|
|Drive power||0,75 kW.|
|Height with a support||1100 mm.|
|Support height||435 mm.|
|Diameter of a tank||1200 mm.|
|Thickness of a wall and cover of a tank||0,8 mm.|
|Tank bottom thickness||1 mm.|
|Honey pocket||85 l.|
|Discharge mechanism||Latch (nerzh.) vnut. diameter is 50 mm.|
- Way of packing: wooden container