Less than 1 year old on Allbiz
- an alkyd quick - drying anti - corrosion primer with the addition of zinc phosphate.
Scope of application
Metallprimer is mainly used to cover corroded surface areas of thin sheet metal, steel, aluminum and galvanized sheets. It is also recommended to use the compound when repainting Plastisol - type surfaces in order to prevent softening of the coating. Surfaces primed with Metallprimer can be repainted with paints containing strong solvents such as cellulose and spray paints.
Metallprimer contains an active anti - corrosion pigment - zinc phosphate. Paint
holds up very well. For best staining results, you must
thoroughly clean the surface and observe the recommended level of material consumption.
Oil and grease are washed off the surface with white spirit. All rust must be removed with a hand grinder, scraper and steel brush. The best results, however, are obtained by cleaning the surface with a blower unit (up to Sa
2 1/2 SS 05 59 00). Prime the surface with Metallprimer so that it is covered with a film of approximately 40 microns, which corresponds to a material consumption of 10 m2 / l.
Similar company products