- Country of manufactureRussia
The plate of PAROC ROS 40g is a nonflammable stone cotton wool which is applied as the main heat-insulation layer (lower or average) in designs of the flat ventilated roofs in the course of reconstruction old and constructions of new buildings. Durability on compression at 10% of deformation of PAROC ROS 40 makes 40 kPa, so the plate can maintain loading to 4000 kg / mv_ in an installation time and operation. It is used in a combination with plates of PAROC ROB 80 (PAROC ROB 80t, ROB 60) in the two-layer or multilayered ventilated roofing design on objects with higher requirements for loadings. In the course of installation the plate is established by ventilating flutes up which connect in a combined collector that promotes fast removal of moisture from a roofing design on system of ventilating channels by means of the deflectors installed on a roof.
Description Value According to Group of combustibility A1 EN 13501-1 Group of combustibility NG GOST 30244-94 The declared heat conductivity, OV" D 0,037 W / (mvvv Ђљ Vkvv Ђћ S_K) GOST 7076 The declared Heat conductivity at 10 VV°S, OV" 10 0,036 W / (mvvv Ђљ Vkvv Ђћ S_K) GOST 7076 Heat conductivity under conditions And in accordance with GOST 0,040 W / m*k Joint venture 23-101-2004, enc. E Heat conductivity under conditions of B in accordance with GOST 0,042 W / m*k Joint venture 23-101-2004, enc. E Heat conductivity at 25 VV°S, OV" 25 0,039 W / (mvvv Ђљ Vkvv Ђћ S_K) Joint venture 23-101-2004, enc. E Dot loading, PL(5) 350 H EN 12430 Water absorption at full immersion in 24 hours, no more 1 kg / mv_ EN 1609 The declared squeezing tension at 10% of deformation, CS(10), (P-with› - B 10) 40 kPa EN 826 Long-term water absorption at partial immersion, WL(P), Wlp 3 kg / mv_ EN 12087 Factor of protection against a rasprostrneniye of steam, MU, (VVµ) 1 EN 12086
Width and length Thickness 600 x 1200 - 1800 mm 100 - 180 mm 900 x 1200 - 1800 mm 140 - 180 mm 1200 x 1800 mm 50 - 160 mm STANDARD STATE STANDARD SPECIFICATION 17177 STANDARD STATE STANDARD SPECIFICATION P EN 822, 823, 1602
The maximum working temperature for products from basalt cotton wool without covering should not exceed 750 oC. Binding begins to evaporate at a temperature over 200 oC. Insulating characteristics I remain invariable, but durability on compression weakens. Materials on the basis of basalt fiber have agglomeration temperature higher than 1000 oC (in a sootvetvetstviye with DIN 4102).