Currency RUB
MP2 500 reducer buy in Voronezh
Buy MP2 500 reducer
MP2 500 reducer

MP2 500 reducer

In stock
Reconfirm the price with seller
Payment:
  • Cash,
  • Invoice payment,
  • Visa/Mastercard,
  • Cash on delivery
  • In detail
Shipping:
Russia, Voronezh
(View map)
+7(8 
Display phones
5
5 years on Allbiz
Technical characteristics
  • Brand-
  • Country of manufactureRussia
  • Gear ratio-
Description
Feature of these reducers of MP2 500 is that they go for the miscellaneous drive pry. the equipment and respectively, neither chemists, nor physicians and other industries do without their application.

Such drives are also present at all-profile machines because in them operating conditions of work make S1 and there corresponds GOST 183-74 Gostekhnadzors. In them alternating current, with normal frequency of 50 Hz and the suitable rated voltage corresponding to state standard specification 21128-83 is applied.

Let's consider conditions, the allowing these models of reducers to use for designated purpose.

To transfer the turning moment the intermediate mechanism blocking impact by cross directed forces on the shaft from exit turning in any parties, but not in one certain is used. The turning moment the constant and variable has the admissible limits in which both loadings work, it is obligatory for two sizes to vector size and the directions corresponding.

Let's sort model MR-2-500-12-80-F-2P-U3 reducer in more detail.

The planetary motor reducer of MP2 500 is designated by two letters MR, and the number of steps at such designation will be - 2.

Diameter of the biggest geared wheel with internal the specialist tooth in mm is expressed in digit 500, and execution on the engine - 12.

Quantity RPM, created by output shaft - 80. Assembly on mounting of F-2P. Let's remind that the designation F-2P speaks about vertical execution.

The model has the output shaft located below from the end made in the form of the semi-coupling flange with the built-in toothed compensator.

The vertical design is determined by F-1V, it has the output shaft located below from the end in the form of the cylinder. The horizontal design is designated as F-2V and it has similar arrangement of shaft and the end of the same form too. These are key parameters which need to be known on MP2 500 reducers.
Shipping method
Payment method
Contact the seller
MP2 500 reducer
MP2 500 reducer
We recommend to see
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Compare0
ClearSelected items: 0