- Country of manufactureRussia
Myasomassazher vacuum universal 200/250/300/350/400 (an option adjustment of turns) is intended for implementation of technological operation of a salting of lumpy meat raw materials after injection by production of sausages and delicacies. Myasomassazher vacuum is suitable for all grades of meat. At rotation of raw materials in capacity, under vacuum, there is its hashing and easy mechanical influence that improves its organoleptic and physical characteristics, and also increases an exit of finished goods.
Frame with the installed drive and the vacuum pump. The frame is executed taking into account rigidity of the design consisting on the support allowing to choose roughness of a floor. On a back wall, on guides the motor reducer for the drive of capacity and the vacuum pump is installed. On the control panel the vacuum gage for control of pumping out of capacity is located. On the top basis the bearing knot in which the shaft on its ends rotates is mounted are located: capacity and the conducted asterisk. At other edge of a frame the basic bearing knot is established.
The control unit is structurally separated from a frame for convenience of sanitary processing, located above a casing of bearing knot. In it all elements and governing bodies of the drive and vacuum pump are located. The control unit is equipped with the timer of shopping center for automatic work of a product.
Capacity of pumping out represents hermetically welded design from stainless steel allowing to make its rotation in the horizontal plane. In a middle part of the feedwell the loading mouth to which via the hinge the cover through rubber laying fastens is located. On the outer side of a bottom of capacity are installed the crane with the union via which pumping is made
To load raw materials, into capacity via the hatch, having filled in with a brine according to a compounding, then to close a hatch cover, having densely pressed hands. To check short-term turning on of the drive of capacity in situation when the crane appears in the top point of a trajectory of rotation. To dress a rubber hose on the nipple of the crane and at the closed crane to turn on the vacuum pump, slowly turning the crane handle, to pump out capacity before discharge, according to technology. Then to close the crane, to remove a hose from a ruff of the nipple. To establish a type of the "manual" or "automatic" mode on the control unit. At the automatic mode it is necessary to gain duration of a running cycle and pause. Then to turn on the toggle-switch of control of the drive. At an equipment complete set - a makhovichok of the regulator to establish by the frequency converter the necessary frequency of rotation. Upon termination of a production cycle of massaging to establish capacity in situation when the hatch is in the lower point to switch-off the control unit of the switch "network". To open the crane for an air blousing in capacity. Then to open the hatch and to unload raw materials in technological capacity. Then to uncover a forward flange for carrying out sanitary processing by solution of 0,5-1% of the calcinated soda at a temperature 50-60os with application of a brush.
The geometrical volume of capacity - 200/250/300/350/400 liters
Loading coefficient - 0.8
Rotation frequency a constant - 12 rpm.
Rotation frequency variable (option) - 0-12 rpm.
Limits of adjustments of time - the right / left / a pause of 0-999 min.
Pumping out depth - 0,85 MPas
Overall dimensions (D200-D400) hshkhv - (1600/1800/2000/2200/2400) h850kh1250
Weight - 247/277/307/337 / 377 kg
Power consumption - 1,5 kW (3x380V)
Warranty period of operation - 12 months