- Country of manufactureRussia
Release agent based on highly refined mineral oils, active separating additives and anti - corrosion additives. When oil is applied, a chemical - physical separation layer is formed between the formwork and the concrete, preventing the concrete from sticking to the formwork. Differs in increased resistance to high temperatures.
Recommendations for use
BETONIT Classic 300 concrete mold and formwork grease is used as delivered.
BETONIT Classic 300 can be used for all common types of formwork in concrete plants and in construction, as well as for non - absorbent formwork (bakelite formwork) and plastic formwork. It can be applied to all types of hygroscopic and non - hygroscopic, wooden, steel and matrix formwork, when a good surface quality of the product and easy separation of the form from the product is required.
BETONIT Classic 300 prevents direct contact of the formwork with the concrete surface. In this way, damage to the concrete surface can be avoided. Thanks to this, the life of the formwork will be extended and the profitability of production will be increased. In addition, the product is safe for the environment.
BETONIT Classic 300 does not affect the subsequent treatment of concrete surfaces (plastering, tiling, wallpapering, painting, etc. ).
- Easy separation of the product from the mold
- Faster stripping and mold cleaning
- Longer formwork service life
- Suitable for all types of concrete
- Improves protection of steel molds against corrosion
- Provides the effect of a glossy concrete surface
- Does not discolor the concrete surface
- Economical to use
For best results, it is recommended to use the OKTAMIX range of greases, cutting fluids, cleaners and anti - corrosion products. Additional information can be obtained on the website www. oktamix. ru or from the representatives of ZSM OKTAMIX LLC in your region.
The product should be stored in a closed container in a dry and clean room, away from flammable materials, heat sources and direct sunlight. Recommended storage temperature 5 - 35 ° C. Avoid deep freezing of the product. The guaranteed shelf life is 12 months.
|Index||Unit rev.||Typical value|
|Density at 20 ° C, kg / m³||kg / m³||0.94 . . . 1.15|
|Flash point||° C||> 120|
|Viscosity at 20 ° C||cSt||25 . . . 40|
|Operating temperature||° C||- 20 . . . + 80|
The values of the given physical and chemical indicators are typical for the currently manufactured products. In the future, they can be changed in accordance with the requirements of the specifications.