represents a two-pack high-strength, chemically resistant material based on epoxy resins.
Recommended application </ b>
Soil enamel is designed to use anti-corrosion protection of mechanical engineering products, rolling compound aircraft, railway Platforms, the outer surface of oil and petroleum products, mineral fertilizers, ship or other metal structures made of carbon steel used in the construction and repair of objects operated in atmospheric conditions, sea and fresh water (hydraulic equipment, etc.). It is recommended for cases when environmental conditions do not allow efficient abrasive-free surface preparation.
Description </ b>
The coating has high anticorrosive properties, weather resistance and chemical resistance.
Appearance Matte, homogeneous film
Color of red-brown, gray, drying time to steres 3, not more than 4 hours
Tax, at t 0 (20+ 2) 0 C
Dry residue in terms of volume 74%
Theoretical consumption per layer 149-261 g / m2
Recommended thickness of one layer 80-140 μm
Operating temperature -60 ° to + 120 ° С
Technical characteristics </ b>
1) The practical consumption depends on the thickness of the layer, the method and the conditions of application, roughness of the surface and the shape of the product.
2) The thickness of one layer on the vertical surface depends on the degree of dilution of the material, temperature, and the application, the roughness of the surface and the shape of the product.
Methods and conditions for applying </ b>
For the preparation of enamel hardener, mix with the basis in the ratio specified in the document on each batch of material, and mix thoroughly. After stirring and exposure for 15? 20 minutes, the soil enamel is ready to use. Are they applied to the dried metal surface with the degree of preparation of SA 2? According to ISO 8501-1 airless spraying or, on an area of less than 1 m2 - brush, in the temperature range of 5? 30 ° C with the relative humidity of the ambient air not more than 85%. Enamel made in winter versions are applied at temperatures up to minus 150s. With the relative humidity of the ambient air no more than 70%.
Precautions </ b>
Material flammable! Works to produce with an effective air exchange using individual means of protection. Do not allow the respiratory and digestive bodies. When the material gets into the skin immediately rinse it with warm water with soap. If you get into the eyes, you need to rinse them with plenty of water. Store the material by following warning inscriptions on the label, indoors, eliminating direct sunlight on it at ambient temperature from minus 20 ° C to 30 ° C. The basis and hardener are stored only in a closed container, completely eliminating the possibility of moisture in them.
</ p> </ div> </ div> </ h3>