Currency RUB
Pipe in PPU D - to 1020 mm buy in Tyumen
Buy Pipe in PPU D - to 1020 mm
Pipe in PPU D - to 1020 mm

Pipe in PPU D - to 1020 mm

In stock
518.86 RUB
This offer is obsolete!
Russia, Tyumen
(View map)
Technical characteristics
  • BrandИнженерные системы
  • Country of manufactureUkraine
Pipes in PPU of isolation have the lowest heat conductivity, reliably protect an external surface of the pipeline from moisture, serve without capital repairs not less than a quarter of the century. Use of such heating mains costs considerably cheaper, than traditional. The pipes isolated by polyurethane foam can be stacked directly in a trench. They are used for networks of any kind of water supply, and also for the pipelines transporting oil or gas. All these advantages are connected with features of a design of pipes in isolation PPU. Let's consider in more detail that such pipe represents.

New steel electrowelded pipes are applied to construction of thermal networks (except for pipes with a spiral seam and the seamless steel pipes allowed for use according to PB 10-573-03-2003, and also conforming to requirements of the normative documents approved in accordance with the established procedure.

Length of the applied steel pipes: for diameters no more than 219 mm – from 8 to 12 m, for diameters of 273 mm and above – from 10 to 12 m, the minimum thickness of a wall of a steel pipe corresponds to GOST 30732-2006. On tre-to a bovaniye of the customer pipes with other geometrical sizes are made: length (no more than 12 m, diameter, the increased wall thickness that is specified at the order.

Length of the uninsulated ends of steel pipes: 150-20 mm for pipes with a diameter of cover up to 315 mm inclusive and 210-20 mm for pipes with a diameter of cover of 400 mm and more. Compositions of polyethylene of pipe brands not below PE-80 in accordance with GOST 18599-2001, black color are applied to production of polyethylene pipes covers (svetostabilizirovanny 2–2,5% of soot. As heat-insulating are applied ma-the teriala meeting the requirements of GOST 30732-2006. Upon the demand of the customer the waterproofing covering can be applied on end faces of thermal isolation of pipes.

All range of pipes and shaped products according to GOST 30732-2006 is issued with wires of system of operating remote control (UEC which allows to find sites with the increased humidity of a heat-insulation layer. For steel pipes with a diameter of 426 mm 2 conductors indicators systems of UEC, for steel pipes with a diameter of 530 mm and more – 3 conductors indicators of UEC are also less installed. Upon the demand of the customer products without UEC system wires can be delivered.


Shipping method
Contact the seller
Pipe in PPU D - to 1020 mm
Pipe in PPU D - to 1020 mm
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
ClearSelected items: 0