Practically in all types of coverings PlayMix glue is used polyurethane binding or just. It is necessary component which reliably fastens comminuted or rubber rubber and allows covering not to collapse for long years. Such characteristics as durability and durability depend on quality binding. But in addition quality binding and the proper handling with it influences also softness of covering, flatness, uniformity of coloring, etc. The PlayMix company offers the clients only the high-quality, certified and passed all necessary tests, binding. For any at the same time, considering that the cost of binding is very strongly reflected in cost value of covering, the fact that the prices in the PlayMix company are lower than retail prices of the plants making binding is important. It is connected with large volumes of purchase of binding. Therefore buying polyurethane binding from the PlayMix company you receive only high-quality products at reasonable prices.
One-component polyurethane binding. Does not contain organic solvents.
Optimum viscosity, good compatibility with different types of the fractioned fillers
In combination with rubber or EPDM crumb forms the rough covering, seamless, elastic, resistant to abrasive wear and shock loadings, interfering sliding.
Thanks to high porosity the covering on the basis of binding and comminuted rubber well passes water and always remains dry.
Gigiyenichnost and high injury prevention. Material is widely applied at the device of coverings of children's playgrounds, sports coverings, paths, otmostok and so forth.
1) Structure - polyurethane prepolymer, target additives
2) Content of non-volatile substances - 100%
3) Covering cure time (at +20 °C and otn.vlazhnost of air of 70%) - pedestrian loadings - no more than 24 hours, transport loadings - in 3-5 days
4) Adhesion strength - not less than 1,5H/mm2
Ranges of application:
Polyurethane binding "PlayMix" is applied as binding to the elastomeric and rubber fractioned fillers at the device of high-strength porous elastic and elastic coatings of floor in and out of rooms, game and sports coverings, playgrounds, caps, otmostok, safety coverings on ladders and ramps, in rooms for keeping of pets, etc.
Requirements to application conditions:
Temperature of components of material, surface of the basis and ambient air in work zone: from +10 °C to +25 °C
Attention! Surface temperature of the basis has to be above the measured dew point at least on 3 °C.
Relative humidity of air: no more than 70%
After through cure the covering on the basis of binding is absolutely safe and it is authorized to operation on objects of public, production and commercial appointment.