Currency RUB
PRIMER-ENAMEL CITANE PROTECTOR buy in Chelyabinsk
Buy PRIMER-ENAMEL CITANE PROTECTOR
PRIMER-ENAMEL CITANE PROTECTOR

PRIMER-ENAMEL CITANE PROTECTOR

Products from producer
In stock
Reconfirm the price with seller
Payment:
  • Cash,
  • Invoice payment,
  • Cash on delivery
  • In detail
Shipping:
Seller
Russia, Chelyabinsk
(View map)
+7(9 
Display phones
Less than 1 year old on Allbiz
Technical characteristics
  • BrandФестПро
  • Country of manufactureRussia
Description

PRIMER - ENAMEL CITANE PROTECTOR

 

FOR PROTECTION OF METAL STRUCTURES (BRIDGES, MAST, FARM) OPERATED IN A HIGHLY POLLUTED INDUSTRIAL ATMOSPHERE, IN SEA AND FRESH WATER, IN AQUEOUS SOLUTIONS OF SALTS, IN OIL AND PETROLEUM PRODUCTS

DESCRIPTION OF MATERIAL

ZITAN - zinc - rich coating (primer - enamel) prevents steel corrosion by combining two protection mechanisms: cathodic (protective), like traditional zinc coating, and barrier (waterproofing), like paint and varnish coating.

Cathodic protection is carried out due to the high content of zinc powder in Citan (90 wt. % ).

When the coating is damaged or when it is exposed to an aggressive environment, many microgalvanic pairs "iron - zinc" begin to work, in which zinc is subjected to sacrificial dissolution with the formation of oxidation products.

Difficult soluble products gradually accumulate in the micropores of the coating, it thickens and becomes less permeable. The waterproofing stage of surface protection begins.

PURPOSE

Coating "Cytan" is intended for anti - corrosion protection of metal structures (bridges, masts, farms, engineering structures) operated in atmospheric conditions of all macroclimatic regions, including in a highly polluted industrial atmosphere, in sea and fresh water, in aqueous solutions of salts, in oil and petroleum products.

APPLICATION AREA

ZITAN is used as a primer for intermediate or topcoats, as well as as an independent coat in atmospheric conditions.

TECHNICAL INDICATORS

These characteristics of the Citan primer enamel have been verified by rigorous laboratory tests.

Indicator name

Technical requirements

 

Colour

 

 

Appearance

After drying, the film should be even, smooth

 

Conditional viscosity at a temperature of (20 ± 0.5) ° С according to a VZ - 246 - 4 viscometer, s, not less

60

 

Mass fraction of non - volatile substances, % not less

55 - 75

 

Drying time of the film, hour, no more at temp. (20 ± 2) ° С, up to degree 3

3

 

Density, g / cm³

2.3 - 2.8

 

Adhesion, points, no more

one

 

Consumption for a single layer coating, g / m2

200 - 320

 

Heat resistance, ° С

Up to 150

 

Single - layer coating thickness, microns

40 - 60

 

Foam strength on impact, according to the U2M device cm, n / m

fifty

 

Flexural elasticity, mm, no more

5

 

 

APPLICATION RULES 

Surface preparation:

It is necessary to degrease the surface of the metal, clean it from scale, rust and traces of old paint. Mechanical cleaning is allowed. Dust off.

Before use enamel "Cytan" must be thoroughly mixed to a homogeneous state, if necessary, diluted to a working viscosity.

Surface application:

Composition "CITANE" is applied in factory and field conditions at temperatures from minus 15 ° С to plus 40 ° С and relative humidity from 30% to 98% .

When applying multi - layer coatings, each subsequent layer is applied after the previous one has dried to "tack".

Avoid prolonged contact of the composition in an open container with air.

Drying of the coating is natural. As the relative air humidity decreases, the drying time of the coating increases.

The holding time of the coating before the start of operation in aggressive environments is 7 days.

COLORING METHOD

Airless spray (thinner toluene or a mixture of butyl acetate and acetone in a volume ratio of 1: 1), air spray, brush, roller.

Contact the seller
PRIMER-ENAMEL CITANE PROTECTOR
PRIMER-ENAMEL CITANE PROTECTOR
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Shipping method
Payment method
Compare0
ClearSelected items: 0