Type: pastelike suspension of zinc dust in epoxy solution with addition of a hardener of the RTsL solvent and other target additives.
Scope: it is intended for protection against corrosion (in a complex covering with enamels) metal surfaces from carbonaceous steel, in atmospheric conditions and in conditions with the increased humidity.
Properties: combustible instantly flammable liquid.
Preparation of a surface: to carefully clear a surface of dust and any other pollution.
Drawing covering: Tsinkolid in 30 min. before drawing add to a primer semi-finished product at careful hashing E-45 hardener at the rate on 100 g of a semi-finished product of a primer of 5 g of a hardener and bring to working viscosity 16-20 with the RTsL solvent and filter through a grid.
After mixing the primer keeps painting properties not less than 12 h. The primer is put with a kraskoraspylitel on previously cleared also by the fat-free steel surfaces not less, than in two layers, with a general thickness within 60-80 microns. Drying of each layer of 1-2 h. When drawing by airless dispersion, a brush or the roller the primer is diluted if necessary with the RTsL solvent. Over a primer Tsinkolid apply enamels not less than 25 microns thick.