Radio control kit Remdevice T3, T5, T7
- Customer pickup,
- In detail
- BrandRemdevice S.r.l.
- Country of manufactureItaly
Push - button remote control for tower and bridge cranes.
The specially developed design of the remote control for convenient operation, easy to hold and perform work operations. Compact size (174x85x37mm) and light weight (350g). The buttons are designed in such a way that the remote control is easy to operate with work gloves (Ø21mm). Large and easy - to - read characters are visible even when you press the buttons.
BATTERY: RUNNING TIME EXCEEDING EXPECTATIONS
The radio remote control is equipped with a built - in high - capacity battery that provides 1000 hours of working time (direct operation, that is, several years of crane operation), which means the end of the traditional restrictions associated with the charging process. The battery is easy to replace and affordable. Alternatively, if necessary, you can use standard AA batteries (4pcs alkaline 1.5V or rechargeable 1.2V) using the special adapter included in the package.
The T series transmitters comply with the standards of the 1st class EN 300220 - 1, which confirms the safety functions, the radio equipment is certified as highly reliable. The product is manufactured exclusively in Italy and complies with all relevant European directives regarding safety at work. The low power start function can be activated, which allows the remote control to start the crane only at close range to control a safe start. After starting, further work with the remote control is carried out at any distance. The transmitter power can also be reduced with decreasing range to increase the autonomy of the remote control.
LOW OPERATING COSTS
The T - series controllers have a unique simple design. The number of parts is minimal, which means high reliability and quick and easy repairs!
If it is necessary to replace the remote control with a new one, thanks to the patented "REMSYS CODE" system, this process is easy and instant. A new replacement remote control can be activated for use with an existing radio control receiver by simply pressing the buttons on the remote control. There is no need to climb onto a crane or manipulate the receiver.
QUALITY AND RELIABILITY
The buttons are made of a special rubber compound that gives a high level of elasticity and durability even under the most difficult working conditions. All electronic and mechanical components are designed, built and tested to withstand extreme use in harsh environments; temperatures ranging from - 20 ° C to + 70 ° C, shocks and strong vibrations.
The nylon housing provides excellent shock and drop protection for the radio remote control, even in low temperatures. It is also resistant to acids, oils and chemicals, with an IP65 rating against dust and moisture.
RECEIVER FOR RADIO CONTROLS T3, T5, T7
RxDIN - T7. The receivers are available in various formats, depending on individual requirements. Rx DIN T7 (pictured) is designed to be installed directly inside an electrical cabinet using a remote antenna. The RX - T7 outdoor sealed design is a compact ECOBOX.
RubyBox - T7. Fast and easy installation.
It is possible to change the frequency of the remote control using the transmitter with the tuning channel indicated by the LED. It is also possible to change the auto shutdown function, RF power level, close start function and auxiliary button function if necessary. The receiver does not require programming or setting by means of switches inside it!
Ecobox - T7. Small receiver for winches and hoists, used where fewer functions are required. Dimensions: 166 x 279 x 91mm (L x W x H).
The monitor tester instantly measures the signal / radio interference levels in the working area of the remote control. It can also be used to view the channel and frequency at which. the transmitter is programmed. It also shows the settings in the remote control and service diagnostic information (number of hours of operation, etc. ).
Characteristics of the Remdevice T3, T5, T7 radio control set:
|The country of manufacture||Italy|
|Working frequency||433 MHz|
|Sensing distance||100 m|
|Response time||50 ms|
|Max. number of simultaneous on / off commands||8 pcs.|
|Working temperature||- 20 + 70|
|IP degree of protection||65|
|Low battery indication||in 30 hours|
|Power consumption||13.5 mA to 24 mA|
|Autonomous working time||over 1000 hours (20 ° C)|
|Signal strength||from 1 to 10 mV|
|Modulation||FM Manchester code|
|Console dimensions||83 x 174 x 42 mm|
|Remote weight||350 g|
|Source of power||3.6 VDC|
|Working current of relay contacts||4 A|
|Supply voltage||10 - 30 VDC, 24 - 48 VAC, 48 - 110 VAC, 230 VAC|
Buy a set of radio control Remdevice T3, T5, T7 wholesale and retail from the manufacturer at a bargain price.
We carry out delivery to the Remdevice T3, T5, T7 radio control set wholesale and retail in all regions of Russia, Azerbaijan, Belarus, Georgia, Kazakhstan, China, Tajikistan, Turkmenistan, Uzbekistan, Ukraine, Armenia, Moldova, Kyrgyzstan, Germany, UAE, Great Britain, Romania, France, etc.