- BrandНПП «МАГНИТО-КОНТАКТ»
- ManufacturerНПП «МАГНИТО-КОНТАКТ»
- Country of manufactureRussia
Declaration of conformity to the requirements of the Technical Regulations of the Customs Union "On the safety of low - voltage equipment" (TR CU 004/2011), the Technical Regulations of the Customs Union "Electromagnetic compatibility of technical means" (TR CU 020/2011) EAEU N RU D - RU. НР15.V. 08437/20 . Valid from 5.10.2020 to 4.10.2025
Reed sensors DG - 360 are designed to monitor moving parts of structures or mechanisms (filling nozzle, etc. ) for movement or displacement, with the subsequent issuance of a displacement signal to the control system control device.
|The state of the sensor's reed switch contacts is determined depending on the distance between the moving part of the structure with the installed magnet and the sensor.|
|Dimensions of the sensor, mm||62 x 41.6 x 19.4|
|Weight (no more), kg||0.15|
|The sensors are designed for operation at temperatures from minus 40 ° C to plus 60 ° C at relative air humidity up to 93% at a temperature of plus 40 ° C|
|Atmospheric pressure, kPa||from 84 to 106.7|
|Average service life||at least 8 years|
|Sheath protection degree according to GOST 14254||IP66 / IP68|
|Permissible short - circuit current Isc of an external source, mA||125|
|Rated voltage value, V
rated current value, mA
|The sensor does not contain precious metals (clause 1.2 of GOST 2.608 - 78)|
3. Delivery set
3.1. The scope of delivery of the detector includes:
- reed sensor - 1 pc.
- passport - 1 pc.
4. Design and principle of operation
4.1. The overall and mounting dimensions of the sensor are shown in Fig. 1.
4.2. The sensors are manufactured with a normally open contact. A normally open contact in the field of action of a magnet is closed and opens when the action of the magnetic field ceases. The distance between the sensor and the moving element at which the reed switch contacts close or open depends on the strength of the magnetic field of the applied magnet.
4.3. The sensors consist of a reed switch unit placed in a rectangular plastic case with through holes for fastening to the surface. The sensor body is equipped with a 3.5 meter double insulated lead.
4.4. DG - 360 sensors are designed for operation at temperatures from minus 40 ° С to plus 60 ° С, type of climatic modification UHL1, placement category 1 according to GOST 15150 - 69. The degree of protection of the enclosure is IP66 / IP68 in accordance with GOST 14254. By the method of protecting a person from electric shock, the sensor corresponds to class "III" in accordance with GOST IEC 60335 - 1.Picture 1
5. Instructions for installation and operation
5.1. The sensor is fixed to the bearing surface with screws or screws through the holes in the base.
5.2. The sensor is a non - repairable item.
6. Transportation and storage
6.1. The transportation of the detector must comply with storage conditions 5 in accordance with GOST 15150.
6.2. Storage of the detector in packaging at the consumer's warehouses must comply with storage conditions 3 in accordance with GOST 15150.
7.1. Disposal of detectors is carried out taking into account the absence of toxic components in it.
8. Warranty obligations
8.1. The manufacturer guarantees the compliance of the detectors with the requirements of the PASHK.425119.114TU technical specifications provided that the consumer observes the rules of storage, transportation and operation.
8.2 The warranty period of storage, subject to the requirements for storage conditions, is 4 years from the date of manufacture of the detector.
8.3 The warranty period of the detector is 3 years from the date of commissioning, but not more than 4 years from the date of manufacture.