Repair of hydraulic carts, in Moscow and MO, diagnostics free of charge!
The most hard work in warehouses is performed by hydraulic carts. Depending on intensity of work different nodes of the cart fail. What to do in this case? Of course, to order repair of the hydraulic cart.
Repair is made only by skilled technicians
Before to start repair, specialists carry out diagnostics of hydraulic carts, both in warehouse of the buyer, and in repair zone of our company. Further the specialist draws up the statement of diagnostics, calculation of cost is carried out, and the manager of service informs you on profitability of repair and advises on all arising questions.
Availability of spare parts for hydraulic carts
The most widespread works on repair of hydraulic carts:
- repair of the water-engineering system;
- replacement of glands and manzhet;
- replacement of rollers and wheels;
- straightening and replacement of drafts;
- replacement of chains of the handle;
- replacement of bearings of wheels;
- welding works and so forth.
Specialists always use only original spare parts. If the cost of original part does not arrange or to find you this spare part it is not provided possible, we replace it with analog.
Minimum terms of works, 100% quality assurance!
The term of repair of the hydraulic cart - from 2nd to 8 hours. Final terms always depend on complexity of repair and the customer's location.
After work on repair, all carts pass test for lifting of loads and operability of each node of design.
SKAY GRUPP gives guarantee for the carried-out works from 3rd to 6 months!
Why we are chosen?
- quick response;
- high-quality and operational repair;
- availability of original spare parts;
- guarantee for the carried-out works.
You can call +7 (495) 221-11-63с department of service or to leave the request by e-mail email@example.com.
If now it is not convenient to you to make call, fill the form provided below and our specialist will contact you in any conveniently for you time.
Why it is favorable to use hydraulic carts
- Maneuverability is inherent to the hydraulic cart that allows to use them even in small rooms. Whereas loaders there just are not located.
- Such carts are capable to lift from 1,5 to 2,5 tons, at the same time length of their pitchfork makes 0,8-2 m.
- By means of the hydraulic drive it is possible to lower and lift load on this or that height.
- It is easy to manage the hydraulic cart, and it costs not much.
The hydraulic cart this special equipment with the low basis which is equipped with metal "pitchfork". It is irreplaceable for transportation of goods which are stored on pallets.
Design features of the hydraulic cart are as follows: it consists of hydraulic jack, the running gear representing system of levers and wheel support. Also one more important part of the cart - pitchfork. By means of this operating part the hydraulic jack carries out lifting of loads on the pallet.
Metal pitchfork of the cart as if hooks the pallet, the hydraulic mechanism lifts them. By forces of one worker it is easily possible to transport the hydraulic cart with load weighing to several honeycombs kilograms on flat surface.
This equipment is very simple on the device, in it there are no difficult nodes and parts. Therefore its repair is quite simple and easily feasible.
During use of this type of carts the hydraulic drive quite often fails. Besides, wheels of the cart assume all volume of load therefore often need replacement.
Repair of carts at low prices
The Sky Group company makes repair of carts, pilers and loaders. With guarantee the good result is achieved by us thanks to availability of big warehouse of spare parts, opportunity to quickly deliver missing parts, qualifications of our employees. Repair of hydraulic carts will be how fast made depends on availability of the necessary spare parts. If specialists find malfunctions of more easy temper, then repair of hydraulic carts can be replaced with cleaning of parts, lubricant and replacement of oil.
If you need major repair of hydraulic carts, then our masters will replace all nodes and mechanisms which had developed the resource. After repair the equipment will look and function as new. And there is repair twice less, than the new cart.
Quite often it happens that those who have hydraulic cart, consider, or to charge what with its repair can be waited its to one of warehouse workers. You will think: a little crookedly hydraulic cart the load rises, or one of rollers has a little worn out. But, as practice shows, timely repair of carts it is possible to lower costs of recovery of functions of the equipment many times.
If it happens so that nonspecialists are allowed to repair of hydraulic carts, then it can lead to unpredictable effects. For example, instead of oil the hydraulic node can be filled with water, antifreeze and even paint. Such precedents took place as some master repairmen note.
It would seem, each cart is similar one to another: identical principle of work, complete set, even appearance. And still producers try not to duplicate models of other producer to have stable sales of the spare parts suitable only this specific cart. Therefore at repair of carts we in 70% of cases should face different design. It does process of repair of hydraulic carts by longer. According to complexity also its cost changes. However we with confidence can tell you: our quotations on rendering this type of service are the most acceptable.