Currency RUB
Repair structure on MBR 400 concrete tiksotropny buy in Kazan
Buy Repair structure on MBR 400 concrete tiksotropny
Repair structure on MBR 400 concrete tiksotropny
remontnyj_sostav_po_betonu_mbr_400_tiksotropnyj
remontnyj_sostav_po_betonu_mbr_400_tiksotropnyj

Repair structure on MBR 400 concrete tiksotropny

In stock
Price from:
870 RUB
Wholesale:
  • 865 RUB/pcs  - from 10 pcs
Shipping:
Seller
Russia, Kazan
(View map)
+7(9 
Display phones

Company rating

97% of positive reviews from 31
9
9 years on Allbiz
Technical characteristics
  • BrandГора Хрустальная
  • UsageUniversal
  • Country of manufactureRussia
  • Weight25 kg
  • State of the materialDry mixture
Description

The structure for repair of MBR 400 "Mountain the Crystal" is the modern and hi - tech construction and repair material intended for repair and correction of defects (such as cracks, chips, shells, etc. ) in monolithic, concrete, stone, reinforced concrete, brick designs. And also for "seal" of technological openings, seams, joints and places of interface of prefabricated concrete and monolithic elements of buildings and constructions (the bases, overlapping plates, concrete floors, bridge designs, chimneys, coolers of combined heat and power plant, a dam, a dam, tanks, treatment facilities). Dry repair mix MBR 400 possesses also high rate on water tightness of W10 that is commensurable with hydrotechnical concrete that allows to use repair structure as waterproofing material, that is for a sutural waterproofing of cracks, seams, joints, places of joining, etc. and also as the reserving plaster waterproofing of surfaces from concrete, a stone, reinforced concrete, a brick, foamy and a gas concrete.

Our repair structure of MBR 400 is the dry mix made on the basis of high - strength cements with addition of quartz sand, a certain particle size distribution, a complex of chemical and active and polymeric modifiers.

Ram structure excellently "to lay down" both on horizontal, and on vertical and ceiling surfaces, does not flow down and does not slip from them. Possesses high strength characteristics and adhesion to the processed basis.

On the technical characteristics and properties repair mixes MBR 400 "Mountain the Crystal" often do not concede to many import and domestic materials, at the same time is significantly cheaper than them.

Technical characteristics are given below:

Color

gray

Knitting

portlandtsement

Filler

the fractioned sand

Fraction of filler

to 1, 00 mm

Water - retaining ability

not less than 98%

The maximum thickness for one pass

50 mm

Water consumption for preparation

0, 18 - 0, 19 l on 1 kg of mix

Usage time

30 min.

Curing time

24 hours

Temperature of a working surface
for MBR 400
for MBR 400M


from + 5C to + 30C
from - 12C to + 5C

Durability on compression (brand)

400 kgfs/cm2 (40, 0 MPas)

Durability on a separation from a concrete surface

15. 0kgs/cm2 (1. 5mpa)

Frost resistance

not less than 400 cycles

Water tightness

not less W10

Packing bags on 25 kg.

Contact the seller
Repair structure on MBR 400 concrete tiksotropny
Repair structure on MBR 400 concrete tiksotropny
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Shipping method
Compare0
ClearSelected items: 0