- Country of manufactureUkraine
SHORT TECHNICAL CHARACTERISTIC
The separator for diesel SDT1-4 fuels is intended for separation of diesel fuels from water and their cleaning of mechanical impurities.
Often SDT1-4 use at the motor transportation enterprises, gas stations, oil depots, etc.
The separator can be used for similar purification of mineral lubricating oils.
At the same time purification of oil is possible without prewarming if its viscosity at 20 °C does not exceed 70 mm2 / with (cSt). For oils viscosity it is higher than 70 mm2 / with (cSt) at 20 °C prewarming to 60-70 °C is recommended.
Processing of aggressive fluids on separator is not allowed.
Execution of separator regarding influence of climatic factors of external environment - UHL, category on location at operation - 4.2 in compliances with GOST 15150-69. Execution of separator explosion-proof, not aseismic. The Pozharovzryvoopasny zone created by the working separator corresponds to the class V-1.
Plant operation can be carried out in the following modes:
- clarifications under atmospheric pressure - for purification of oil mainly only from mechanical impurities (cleaning with clarification method);
- purifikation - for department of oil mainly from water.
At plant operation in the clarification mode under the atmospheric pressure (purification of oil of mechanical impurities) dirty oil via the crane through passage and the coarse filter, the pump is sucked in from the capacity of dirty oil and forced in the electric heater. Heated oil from the electric heater on the pipeline comes to separator drum. The oil purified in drum via the camera of neat oil of oil pan merges in vakuumbak as in the capacity through passage (depression in vacuum - tank is not created). From vacuum - tank neat oil is pumped out by the pump and forced in the capacity of neat oil directly or via the filter - press if it is necessary to purify oil of those impurity which on the properties cannot be separated in drum in addition. The mechanical impurities which have separated from oil are postponed in the form of deposit on inner cylindrical surface of the body of drum of separator. The oil accumulating in operating time in separator bowl on the pipeline via the gate is dumped in the pallet from where it flows down in drainage tank. From drainage tank via the gate oil comes to the line of oil supply of installation.
At plant operation in the purifikation mode (separation from "free water") difference of working process from described above consists that in the reel assembled in this case on the purifikation mode there is division of two liquid environments - waters and oils. Via the camera of the separated water on the pipeline it is dewatered in the special receiver or in the industrial sewerage. For ensuring process of purifikation in drum the water seal is surely created.
This separator for diesel SDT1-4 fuels of warehousing.
Delivery time: 2 weeks after payment. (this necessary time for preparation of separator, carrying out testing, adjustment, running in).
After carrying out pre-sale preparation, the separator will be completely ready to work.
On this separator the guarantee of 6 months is provided for diesel SDT1-4 fuels.
If there are questions, call or write!
RADA WE WILL COOPERATE WITH YOU!