- Country of manufactureRussia
THE FIRST METER OF ANY LINE REMAINS COLD!
ATTENTION: when using thermal insulation, pay attention to its temperature limits!
Calculation of heating cable length - Download formula
The Siberian plant "RIM" specializes in the production of heating equipment, in particular, heating cables of various capacities. Heating cable "RIM" with a capacity of 30 W / m is a worthy solution for heating the ground in greenhouses, roofs, gutters, doors. In addition, it is possible to order underfloor heating based on a heating cable, suitable for floor heating both in apartments and in private houses, summer cottages, baths, as well as public institutions.
The "heart" of the cable is made of constantan alloy, which provides good thermal conductivity of the cable and helps save energy. The heating elements of the cable are laid in an insulating silicone sheath made in Germany, which allows the equipment to be mounted near hazardous environments and in adverse weather conditions (for example, in frost, due to a wide range of operating temperatures).
The company "RIM" produces heating wires on an automated line controlled by an engineer, which makes it possible to manufacture large batches of equipment in a short period of time.
All heating cables "RIM" of different power (for example, 30 W / m) are produced in special coils of 50 - 100 m, which allows, having cut off the required footage, to carry out installation.
Heating of ground in greenhouses, heating of doors, roofs and gutters.
High - temperature heating cable RIM can be used for refrigeration equipment (defrosting, defrosting, condensate drainage), to provide comfortable heating in residential premises. With the help of cables, an electric heating system is installed - warm floors. For anti - icing systems on the roof; for protection from snow, icing and freezing in open areas; to protect metal pipes from freezing, to heat the ground in greenhouses and hotbeds. The cable has a bending radius of 1mm, thanks to which it can heat even the most complex geometric structures The maximum temperature for heating the cable in the open air is 85 degrees Celsius.
The bending radius of the cable is 1mm, it can be used to heat the most complex geometric structures. Heating cable RIM 30w has silicone insulation and does not break in the cold, it can be operated at temperatures from - 60 to + 200 degrees Celsius, and for a short time it can withstand up to + 300 degrees. The silicone sheath allows the cable to be used in destructive environments: frost, heat, water, oils, acids.
Heating cable RIM 30w has energy consumption 40% lower than that of analogs, due to the use of CONSTANTAN as a heating element. Constantan is a thermostable alloy based on copper (about 59% ) with the addition of nickel (39 - 41% ) and manganese 1 - 2% (Mn). The alloy has a high specific electrical resistance (about 0.5 μOhm x m), a minimum value of the temperature coefficient of electrical resistance, a high thermoelectromotive force in combination with copper, iron and chromel.A type: resistive Heating element: constantan wire Specific power: 30W / m Maximum heating temperature in air: 85 ° C Maximum heating temperature in insulation (without cooling): 135 ° C The size: 5x8mm Maximum cable chain: 100m Rated voltage: 230V Grounding: there is Degree of protection: IPX7 Operating environment temperature: from - 60 to + 280 ° С Additional Information: shielded, cut off and sold in any length multiple of a meter Shelf life: is not limited Lifetime: 50 years