- BrandТПК, ООО
- Country of manufactureRussia
The silo is established on a production site if it is necessary to do accumulation of waste for burning, productions of briquettes or saw, and also if there are problems with daily garbage removal and waste
The silo is executed in the form of the cylinder. The bottom is flat on which the shneko-spring mechanism of unloading of material is located. Productivity of unloading is selected proceeding from requirements of the Customer.
All elements of a silo are made of galvanized metal industrially and arrive on a building site in a look, ready for installation. Elements of a silo connect among themselves bolts and do not demand in the course of welding installation. The case is tight that excludes moisture hit inside and material freezing in the winter.
In a silo thermal sensors and system of water supply in case of ignition are installed.
Loading can be made by pneumotransport or the mechanical conveyor.
Volume: from 25 to 400 cube.
1. Filtering sleeves
2. Emission of clean air in shop
3. System of unloading
4. An intake of the polluted air from shop
5. The fan with the electric motor
7. Fire pipe
Principle of action:
The polluted air from shop gets to a silo (the bunker the store) on an air duct (4). There is a sedimentation of large fractions of dust and sawdust, further air passes through filtering sleeves (1) and already cleared, by means of an air duct (2), gets back to shop. In process of accumulation of particles on a surface of filtering sleeves the dusty cover is formed, filter resistance increases that worsens work of aspiration system. Stirring of filtering sleeves with use of vibrostryakhivatel is made for maintenance of the mode of a filtration. Dust and sawdust collect in the bunker the store or by means of system of unloading (3) are utilized.