SOG-913KT1FVZ is intended for thin purification of the industrial and power oils prepared to 17 classes of purity (GOST 17216-71), working liquids of hydraulic systems, SOZH, diesel fuel and kerosene - from mechanical impurity and water. from mechanical pollution which density exceeds density of the purified liquids and not dissolved water in which no more than 10% on weight. To carry out preparation of liquids by method of upholding, a filtration, etc.
IT IS NOT ALLOWED:
- purification of solvents with the stand,
- gasolines, all brands,
- and also toxic and aggressive to aluminum alloys, not corrosion-resistant stalyam and oilproof rubber of liquids.
On the case the block of filters of preliminary cleaning in which lower part the drainage branch pipe with a cap is located (As the filtering elements the oil filter of the car KAMAZ or the pre-filter from a two-layer corrosion-proof grid, the size of a cell of 400 microns is used) is placed Operation of the equipment is possible both with the pre-filter, and without it.
The stand can be operated in explosive zones of a class 2 - GOST 51330.9-99 part 10 "Classification of explosive zones - item 4.1. The appendix as an example for No. 1."
As a part of the stand only the explosion-proof electric equipment with a blast-tight cover of the II group in accordance with GOST P 51330.0-99 and GOST 12.2.020-76 with marking of explosion protection of 2 Exed II CT6 is applied; the certificate of the manufacturer of electric equipment is put to the passport of installation.
By efficiency of cleaning of mechanical impurity the SOG-913K1FVZ stand is equivalent to the 5-micron aviation filter, but, besides, it is capable to delete not dissolved water. It is much less costs of operation of SOG-913K1FVZ due to bigger contaminant capacity and lack of the problems connected with change and utilization of filter elements. In the course of cleaning from the fulfilled or polluted oils completely are removed fur. impurity, and also partially aging products.
Compactness and mobility of SOG stands allow to apply them directly on workplaces about the equipment. Use in a design of supersolid antifrictional materials for bearings of quickly rotating centrifuges provides high operational reliability of stands. High-quality purification of oil quickly and economically.