Seller
+7(8
Display phones
3
3 years on Allbiz
Quickly responds
Technical characteristics
- BrandДжилекс
- Country of manufactureRussia
Description
Submersible pump water jet TRAC 110/110
PROF. Cannon designed for deep water supply from wells. Water jet pumps are used in wells with a diameter of 100 mm. The pump housing is made of stainless steel, the engine on the top that allows you to pull the cable from the top and, accordingly, reduce the diameter of the pump that can be placed in a narrower liner that cheapens the process (as trumpet, so it's cheaper). At the bottom of the pump strainer is installed, that prevents the inside of the large particles of sand and dirt, thus saving the pump from jamming. But the main feature is the existence of two water jet pump seals. One is responsible for the sealing of pumping unit, protects the engine from excessive pressure, which can occur when pumping work steps. The second seal was responsible for sealing the motor specifically for that part, which is filled with oil. Also this seal protects against the effects of high pressure water on the engine parts. Thanks to this compression, in case of breakage of the motor oil does not fall into the clean water wells or wells. Pump Pump stages have a high degree of integrity, has a thermostatic switch. Features:
- Robust stainless steel;
- Use in wells with a diameter of 100 mm;
- There is a strainer to prevent pollution;
- Two seals of the pump to protect the pump body and motor;
- Low noise;
- Large hydraulic efficiency;
- Can be used in partially submerged position.
Characteristics:
Maximum power (kW): 1.8 Total head (m): 110 Maximum immersion depth (m): 30 Maximum flow rate (l/min): 110 Particulate size (mm): 1.5 Maximum working pressure (bar): 11.5 Maximum current (A): 7.9 Weight (kg): 28.4 Cable length (m): 70 Voltage (v): 220 Fitting size (mm): 31 Dimensions (mm): 98x98x930Similar company products
Contact the seller
Submersible pump water jet TRAC 110/110
