- Country of manufactureRussia
Substrate feed conveyor (TPS - 650)
The TPS - 650 conveyor is intended for transporting the substrate from the CM - 8 to the PSMB - 1 - 5, PSMB - 1 - E press.
The conveyor can operate in two modes:
1) manual, the substrate is fed by pressing the pedal.
2) automatic (additional installation of the weighing kit is required), in this mode the operation of the conveyor and the press is synchronized.
The operation of the conveyor in automatic mode is as follows, in the control system of the press (brands PSMB - 1 - 5, PSMB - 1 - E), the weight of the block is set (from 10 to 18 kg).
The TPS - 650 conveyor loads the substrate into the press receiving hopper, upon reaching the set weight, the conveyor turns off, and the press begins to form the substrate block.
After the receiving hopper feeds the substrate into the press chamber and returns to its original loading position, the conveyor will turn on until it fills the press receiving hopper again. Then the cycle repeats again.
An equalizer is installed on the TPS - 650 conveyor for uniformity of the supplied layer, which ensures more correct and correct operation of the weighing device.