Wearproof technical felt (Igloprobivna).
Technical felt of the increased wear resistance is applied in metallurgical industry, in pipe production and in sheet machining.
Generally wearproof synthetic felt is used:
- for brake mechanisms on machines for longitudinal cutting of rolled sheet metal.
- for cleaning of the giving rolls of live rolls of the sticking metal.
- for a covering of reception tables on which the cut metal sheets arrive.
Depending on a task felt is selected with the optimum parameters (density, thickness, material, etc.). At the same time the main condition of operation is the special increased resistance to attrition. Synthetic felt has several times higher wear resistance, than natural felt.
On machines for longitudinal cutting of metal the Russian enterprises which a few years ago began to use synthetic rolled felt instead of natural grubosherstny felt gained evident economic effect due to increase in its service life.
The following step for optimization of process of longitudinal cutting of a leaf offers to use the special technical felt developed by the VFG company. Features of technological process of production allow to deliver it in already cut sheets of the size necessary to the client. This felt has the special processing raising it resistance to attrition that increases its operating time many times even in comparison with rolled synthetic felt. Such special felt the smaller quantity is required, labor costs on its replacement decrease, equipment downtime decreases.
In addition to rolled and sheet felt the VFG company makes a wide range of products of felt, both from synthetic, and of natural. On demand the offer on a lot of products is provided.
|Form||The used materials||Density||Thickness||Width|
|Rolled felt||Polyester, polyamide, polypropylene||0,10 - 0,36||2,5 - 25||220|
|Sheet felt||0,10 - 0,36||2,5 - 110|
|Pipe from felt||0,25 - 0,50||3 - 20|