- BrandКОММАШ (Арзамас)
- Country of manufactureRussia
The combined road KO-829B1 car is intended for year-round service of city and main roads with an asphalt and concrete covering at an air temperature from minus 20 s to plus 40 s.
- During the summer period the car is used for a sink, watering, cleaning of dirt and dust of pavings, and also for a sink of sidewalks and watering of green plantings and lawns.
- During the winter period the car is used for high-speed and patrol cleaning of a roadbed of the new-fallen or pressed snow, removal of frost and topping by deicing materials.
|Full weight, kg||22400|
|Overall dimensions (DKHSHKHV), mm||11900*х4225*х3600 *|
|* the maximum indicators are specified|
|- NNM tanks||12|
|- plastic tanks||10|
|- tanks of system of moistening||1,56|
|- PGM distributor bodies||8|
|Width of a working zone, m|
|- PGM distributor||2-10|
|- low pressure sink||2,5 - 20|
|- high-pressure sink||horizon. 2,8 - 3,5, vert. 0,8|
|- laths for distribution of ZhPGM||3-12|
|Density of distribution of PGM, g/m2|
|- peskosol||50 - 500|
|- pure salt with moistening||5-50|
|- liquid reagents||5-80|
|Compatibility with additional options|
|- the dump is forward rotary||+|
|- the dump is forward rotary hydraulic||+|
|- dump high-speed||+|
|- dump side||+|
|- the dump is grader||+|
|- the brush is frontal||+|
|- the brush is interbasic||+|
|- the brush is back||-|
|- a brush for a sink of barrier protections||+|
|- the gun is raspylitelny||+|
- The body of the European section, the increased rigidity, geometry of a body excludes lag of PSS on body walls.
- Design of the scattering device easily folding, allowing to make replacement of any element with use only of a hand tool.
- Arrangement of a spare wheel behind a cabin.
- Maslobak with a compartment under hydroelements is transferred for a chassis cabin, the cover of the hydroblock is made of aluminum.
- On all length of a body brushes for cleaning of chains and scrapers and the protective pallets preventing PSS prosypaniye on chassis units are established.
- Possibility of installation of one of three types of chains with the increased explosive effort: anchor calibrated, vtulochno-roller, lamellar.
- Two options of a brush interbasic on execution of the drive: one SY-250 hydraulic motor, two MGP-125 hydraulic motors. Control of turns of a brush is carried out by means of PP12-01 expense regulator.
- The cone-shaped form of a disk of a spreader and Z-shaped guides of a shovel provide uniform distribution of PSS on width. Hydraulic motor of the drive of a disk of import production (Bulgaria).
- The conveyor drive – a reducer with the hydraulic motor of import production.
- Management of operation of the hinged equipment from the driver's cabin.
- Ladder for visual survey.
- Regulation of the scattering disk on height.
- The lattice for trim of the PSS large fractions is executed from metal. strips it is also equipped with the technological hatch for access to mechanisms.
- The notification of the driver about emergency leak of hydroliquid from system by means of the visual alarm system in the driver's cabin.
- The drain highway of the increased section excluding temperature increase of hydroliquid to critical values.
- System of regulation of width and asymmetry of distribution of PSS.
- The bearing knot of a tension shaft is taken out from zone PSS.
- Additional flashing beacon in a zone of the scattering device.
- Material of a mobile tray and the mine of supply of sand – stainless steel.
Terms of delivery:
- Minimum scope of supply: (from 1 piece)
- Terms of delivery: (FCA, CPT, CIP)
Terms of payment:
- bank transfer,
- advance payment of 100%,
- advance payment for statement in the plan of production of 50%. The rest of 50% before shipment.
The company makes:
- Garbage trucks with back loading,
- Garbage trucks with side loading,
- Container garbage truck,
- The combined road cars,
- Vacuum cars,
- Ilososny cars,
- Cars for washing of channels,
- The combined cars.